Page 2
4. Reassemble the earphone by inserting the PVC Elbow and Twist Connect respectively into the top and bottom of the Acoustic Tube. Insert the Earbud onto the open end of the PVC Elbow. 5. Insert the straw from a can of compressed air into the hole at one end of the earphone and blow any debris or water out of the Acoustic Tube.
Page 3
5. My Acoustic Tube appears to have a “air bubble” in it or the tube material is distorted. Can I fix it? If the Acoustic Tube appears to have an air bubble inside of the tube, it may just have moisture or condensation trapped inside. Follow the cleaning instructions on page 4 of this guide. If the tube material is warped, bulging, or distorted or if cleaning fails to improve the problem, then you may need to replace the P-Tube with a new one.
Acoustic tube REPLACEMENT PARTS Most parts of the Acoustic Tube assembly can be replaced if they wear out. Optional parts are also available, such as noise attenuating inserts! To purchase replacement parts or upgrades, contact the PRYME dealer that you purchased the earphone from or go to www.PRYMEstore.com.