Kenwood TK-2302 Instruction Manual page 3

T Y
hank ou
We are grateful you have chosen Kenwood for your land
mobile radio applications.
n
oTices To The
◆ Government law prohibits the operation of unlicensed radio
transmitters within the territories under government control.
◆ Illegal operation is punishable by fine and/or imprisonment.
◆ Refer service to qualified technicians only.
Safety: It is important that the operator is aware of, and
understands, hazards common to the operation of any
transceiver.
Terminal Descriptions
Speaker/ Microphone Jacks
It is possible to use a resin-based cover for the Speaker/ Microphone jacks.
NO. Name
1 PTT / RXD
2 MIC
3 MICIN
4 OPTDET
5 5M
6 AE
7 TXD
8 NC
9 SPO
10 SPI
Antenna Terminal
50 Ω impedance
Battery Terminal
The battery terminal uses a spring plate.
The negative terminal connects to the chassis ground.
The battery is mounted on the rear side of the transceiver using a latch
mounting method.
u
ser
Description
External PTT Input / Serial
Data Input
External MIC Input
Internal MIC Output
External Option Detect
5V Output
GND
Serial Data Output
No Connection
Audio Input
Received Audio Output
Impedance
CMOS
1.8 kΩ
1.8 kΩ
High Impedance
100 Ω
GND
CMOS
−
8 Ω
8 Ω
I/O
I
I
O
I
O
−
O
−
I
O