Connection - Kenwood KTC-D500E Instruction Manual

Connection

Connect the monitor and power as follows.
Set S position when connecting
by AV Cable (RCA).
To AV input of the monitor Î
• 75Ω
• F connector
• For VHF/UHF
⁄
Connection of antenna with booster
amplifier
Set "0/5 Volt" ON when connecting an
antenna with booster amplifier to this unit.
Ignition key switch
Car fuse box
(Main fuse)
+
–
Battery
+
24
KTC-D500E
Digital TV Tuner 1
Wiring harness 3
ACC
A
B
Car fuse box
C
Set C position when connecting by
Kenwood TV Interface Cable.
Ground wire (Black) - (To car chassis)
Fuse (5A)
Fuse (3A)
TV Interface Cable 5
C
Battery wire (Yellow)
B
Ignition wire (Red)
A
To the center unit
such as a DVD
receiver. ÅıÇ