Advertisement
INSTRUCTIONS FOR USE
BEFORE USING YOUR JUICE EXTRACTOR
Follow the assembling instructions listed below before using your
Oster® Juice Extractor:
• Before you start assembling your juice
extractor, make sure it is unplugged and it
is placed on a dry and level surface
• Place filter basket on top of the motor base
(Figure 1)
• Place the stainless steel filter on top of the
filter basket pushing down and turning it
until it fits into the grooves of the motor
shaft (Figure 2)
• Place juicer cover/lid on top of the filter
basket (Figure 3)
• Raise the safety locking arms, then lower
them to securely fit into the grooves in the
lid and then firmly press lower part of the
locking arms into the unit ensuring they
lock the lid into the unit (Figure 4)
• Place the pulp container into position by
tilting it slightly (Figure 5)
Important: Make sure Pulp Container edge
is underneath the lip of the basket
• Place the 20 oz. jar under the spout located
on the right hand side of the juicer by
tilting it slightly. Other jars or glasses can
be used as well (Figure 6)
7
Figure 6
Figure 5
www.oster.com
Figure 1
Figure 2
Figure 3
Figure 4
Advertisement
