Specifications; Installing The Battery; Functions - CEN-TECH 60725 Owner's Manual & Safety Instructions

Specifications

Measurement -36ºF to 968ºF
Range (-38ºC to 520ºC)
± 2% above 32ºF
Accuracy
± 4.5% below 31ºF
Response Time 1 Sec
Spot Size Ratio 8:1 (Distance : Spot size)
Needed Batteries Two AAA (not included)
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.

Installing the Battery

Remove the battery cover and insert two AAA batteries into the unit,
following indicated polarity. Replace the battery cover.

Functions

ºF/ºC Button
Page 4
LCD
Battery
Cover
For technical questions, please call 1-800-444-3353.
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
Max. Output: <1 mW,
Wavelength: 635-660 nm
CLASS II LASER PRODUCT
This product complies with 21 CFR 1040.10
and 1040.11 - Diode Mfr.: Wenzhou Xinke
Electronics Co.,Ltd., No.39-4 Tutian Rd,
Tutian IZ Yangfushan, Lucheng District,
Wenzhou City, Zhejiang, China
Made in China
12j
Laser Beam
ON/OFF
Trigger
WARNING
To prevent serious injury,
do not use for medical purposes.
Manufacture Date:
Item 60725