Specifications; Setup; Operation - Drill Master 91062 Owner's Manual & Safety Instructions

Specifications

Electrical Requirements
Drum Speed
Cutting Speed
Max. Planing Width
Max. Planing Depth
Dust Chute Dim.
Number of Blades
Setup - Before Use:
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:
Make sure that the Trigger is in the off-position and unplug the tool from its
electrical outlet before performing any procedure in this section.
Note: For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 14.
Functions
Depth
Knob
Guide Lock
Knob
Page 8
120VAC / 60Hz / 5.5A
16,000 RPM
32,000 Cuts per minute (2-knife drum)
3-1/4"
1/16" Per Pass (Adjustable)
1-1/2" I.D. x 1-11/16" O.D.
2
For technical questions, please call 1-800-444-3353.
215530
Dust port
Guide
Safety Lock
Button
Trigger
cover
Item 91062