Table of Contents
Advertisement
owner's manual
F7- MIDI Filter
Using the Rp 800 to control other instruments connected via MIDI, it could be necessary to filter the
Control and Program change messages from the MIDI transmission.
Press the
Functions button
F8- Start Up mode
With this menu you can decide if the default start set up of the Rp 800 will be factory set or user set.
Press the
Functions button
F9- Midi dump
This function allows to save to an external MIDI sequencer the programming data of the Rp 800.
Press the
Select F9 using the
Functions button
SELECT/TEMPO buttons
F10- Pc port mode
This menu sets the Rp 800 pc port mode: Pc2, Pc1, Macintosh computer.
Select F9 using the
Press the
SELECT/TEMPO buttons
Functions button
Page14
Select F7 using the
Pressing the DATA button the display shows the
SELECT/TEMPO buttons
Select F8 using the
Pressing the DATA button the display shows the
SELECT/TEMPO buttons
Pressing the DATA + button the Midi data bulk will start. The display will
Pressing the DATA + button the display shows the
BALANCE
DATA
current value (OFF by default).
BALANCE
DATA
current value (Factory by default).
BALANCE
DATA
show a countdown until the data transmission is over.
BALANCE
DATA
current value (PC2 by default).
rp800
01
Program Chng.
Program Chng.
02
Control Chng.
Control Chng.
03
Program+Control
Set the filter type
using the DATA
buttons.
Change the start up
mode using the DATA
buttons.
Change mode using
the DATA +/- buttons.
Hide quick links:
Advertisement
Table of Contents
