AD-24 ANALOG INPUT & DIGITAL CONVERTER USER GUIDE 1266 Park Road Chanhassen, MN 55317 952-401-7700 support@digitalaudio.com www.digitalaudio.com Version 1.0 March 2014 LIVEMIX AD-24...
SAFETY INSTRUCTIONS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. CONTACT DIGITAL AUDIO LABS FOR SERVICING. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated and/or potentially dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Digital Audio Labs warrants their products against defects in material and workmanship for a period of two years from date of purchase. During this period, Digital Audio Labs will, at its option, repair the defective unit or replace it with a new or rebuilt one.
• External 12VDC Power Supply INTRODUCTION The Livemix AD-24 is the analog input component for the Livemix system. The AD-24 receives line level audio signals from a mixer, snake, or interface and converts them to the Livemix Data format. Livemix audio data is sent from the AD-24 to the MIX-16 over a single shielded CAT5 or CAT6 network cable.
4. DB-25 Inputs: Each DB-25 connector carries eight separate The DB-25 connectors on the channels of balanced, +4dBu audio signals, using a single Livemix AD-24 are passed multi-pin connector. Since each connector carries eight through to the ¼” TRS inputs.
Page 7
8. Livemix DATA Light: This light will illuminate green when the AD-24 has a valid connection and is sending data to a MIX-16. If this light is red, it is an indication that the connection to the MIX- 16 is not functioning properly. A shielded CAT5 or CAT6 cable is required for proper sync. LIVEMIX AD-24...
4. Connect the Livemix Data Out port on the AD-24 to the Livemix Data In port on the MIX-16 with the included shielded CAT6 cable. 5. Turn on the power switch to the AD-24. LIVEMIX AD-24...
MIX-16. Using various controls on the unit, two users can each create their own custom mix, which is then output to headphones, in-ear monitors or stage monitors, right from the CS-DUO unit. LIVEMIX AD-24...
8 channels through a single multi-pin connector. By using cabling that terminates on the AD-24 side using DB-25 connectors instead of ¼”, you can feed all 24 inputs using only three connections, instead of 24 separate ones. LIVEMIX AD-24...
Need help?
Do you have a question about the LIVEMIX AD-24 and is the answer not in the manual?
Questions and answers