Tascam CG-2000 Owner's Manual
Tascam CG-2000 Owner's Manual

Tascam CG-2000 Owner's Manual

Master clock generator
Table of Contents

Advertisement

Quick Links

D01221520A
CG-2000
Master Clock Generator
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CG-2000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Tascam CG-2000

  • Page 1 D01221520A CG-2000 Master Clock Generator OWNER'S MANUAL...
  • Page 2: Important Safety Precautions

    IN USA/CANADA, USE ONLY ON 120 V SUPPLY. DECLARATION OF CONFORMITY We, TEAC EUROPE GmbH. Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany declare in own responsibility, the TEAC product described in this manual is in compliance with the corresponding technical standards. TASCAM CG-2000...
  • Page 3: Important Safety Instructions

    CAUTION normally, or has been dropped. • Leave 1U of space above the unit for ventilation. • Allow at least 10 cm (4 in) at the rear of the unit for venti- lation. TASCAM CG-2000...
  • Page 4: Safety Information

    For China “仅适用于海拔 2000m 以下地区安全使用” “仅适用于非熱帯气候条件下安全使用” “環境保護使用年限” 产品有毒有害物质或元素的名称及含量 机种 : CG-2000 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚...
  • Page 5: Table Of Contents

    Enabling automatic audio clock frequency Performance ...............29 setting ................17 General .................30 Setting the audio clock frequency multiplier for Dimensional drawings ............30 the WORD 11/12 OUTPUTS ........18 Setting the output format for AES 3/11 and S/PDIF output connectors ........18 TASCAM CG-2000...
  • Page 6: Introduction

    You can also Please contact TASCAM if any of these items are missing or have download a copy of this manual from the TEAC Global Site been damaged during transportation.
  • Page 7: Precautions For Placement

    • Connect the unit to the standard power outlet. • Hold a power cord by its plug when connecting and Customers in the USA, please visit the TASCAM website (http:// disconnecting it. tascam.com/) to register as a user online.
  • Page 8: Names And Functions Of Parts

    Blinking: The power redundancy function is on, but only indicators. one circuit is operating. Unlit: The power redundancy function is off. MENU button When the Home Screen is open, press this button to open the menu screen. TASCAM CG-2000...
  • Page 9: Rear Panel

    When an error, for example, occurs in this unit, messages can be sent out through this connector. AC IN A/B connectors Connect the included power cords here. To operate this unit with power redundancy, connect power to both the AC IN A and AC IN B connectors. TASCAM CG-2000...
  • Page 10: Home Screen

    When the reference redundancy function is on, this shows the mode used to switch the reference redundancy clock. Secondary reference clock selection status When the reference redundancy function is on, this shows the selection status of the secondary reference clock. TASCAM CG-2000...
  • Page 11: Error Information Screen (Button Lit Red)

    This shows the result of the error. Date and time of recovery This shows when recovery from the error occurred. Recovery details This shows how recovery from the error occurred. Results of recovery This shows the results of recovery. TASCAM CG-2000...
  • Page 12: Menu Structure

    Check firmware version and update VERSION page 27 firmware LOG EXPORT Export operation logs page 24 ERROR LOG View error logs — NOTE For details about the factory default settings, see “Default setting values list” on page 28. TASCAM CG-2000...
  • Page 13: Basic Menu Screen Operation

    Press the EXIT/CANCEL button to cancel a menu operation To move up one level in the menu or return to the and return to the menu screen. menu: Press the EXIT/CANCEL button. To return directly to the Home Screen from menu mode: Press the HOME/DISPLAY button. TASCAM CG-2000...
  • Page 14: Preparation

    • Turn all devices being connected off (or put them in standby) before making connections. USB flash drive WORD IN VIDEO OUT WORD/EXT AES3/11 WORD IN AES3/11 IN S/PDIF IN VIDEO IN GPS OUT ALARM 1/4,1/2,1, 2,4,256Fs Audio recorder, video recorder, External Master clock digital mixer, etc. receiver indicator generator TASCAM CG-2000...
  • Page 15: Turning The Power On/Off

    3. Press the MULTI JOG dial to enter setting mode and show the cursor on the item to be changed. 4. Turn the MULTI JOG dial to change the value. Then press the MULTI JOG dial to confirm it and move the cursor to the next item. TASCAM CG-2000...
  • Page 16: Basic Settings

    REFERENCE Options: PAL, NTSC (default), 720P, 1080i, 1080PsF, 1080P page, and turn the MULTI JOG dial to select the FORCE item. 4. Press the MULTI JOG dial to confirm the selection and return RELOCK to the menu. TASCAM CG-2000...
  • Page 17: Setting The Audio Clock

    3. Turn the MULTI JOG dial to turn automatic audio clock frequency setting on or off. Options: OFF (default), ON 4. Press the MULTI JOG dial to confirm the selection and return to the menu. TASCAM CG-2000...
  • Page 18: Setting The Audio Clock Frequency Multiplier For The Word 11/12 Outputs

    3. Turn the MULTI JOG dial to set the output format for the S/ PDIF 1/2 OUTPUTS (RCA pin jacks). Options: AES3, S/PDIF (default) 4. Press the MULTI JOG dial to confirm the selection and return to the menu. TASCAM CG-2000...
  • Page 19: Reference Redundancy Function

    1: Switches to primary reference clock, which has priority. NOTE The secondary reference clock setting is saved separately for each primary reference clock. 1. Press the MENU button to open the REFERENCE menu page, and turn the MULTI JOG dial to select the item. SECONDARY TASCAM CG-2000...
  • Page 20: Setting The Sequence Mode

    3: Even if the reference clock is lost, the unit will not switch to a 3. Press the MULTI JOG dial to restart the reference redun- higher priority reference clock. dancy function using the primary reference clock, and return to the menu screen. TASCAM CG-2000...
  • Page 21: Preset Function

    Be aware that the settings previously stored with that preset defaults button will be overwritten. The presets can be restored to their factory defaults by restoring all the settings in the unit to their factory default settings. (See “Restoring factory default settings” on page 27.) TASCAM CG-2000...
  • Page 22: Operations Using Usb Flash Drives

    USB flash drive contains a file with data for the same preset screen. number, it will not be overwritten when the new file is saved. 3. Turn the MULTI JOG dial to set the item to MODE EXPORT TASCAM CG-2000...
  • Page 23: Importing Presets From Usb Flash Drives

    6. Press the MULTI JOG dial. If you selected data for a preset on the USB flash drive, the screen will open. IMPORT TO If you selected SYS ALL data, the import confirmation screen shown in step 8 will appear (skip step 7). TASCAM CG-2000...
  • Page 24: Exporting The Operation Log

    2. Press the MULTI JOG dial to open the LOG EXPORT pop-up message. 3. Press the MULTI JOG dial again to export the log. Press the EXIT/CANCEL button to cancel exporting 4. After exporting or canceling, the screen reopens. TASCAM CG-2000...
  • Page 25: Analyze Function

    Analysis results: fps for video and Hz for other items PHASE DIFFERENCE This shows the phase difference between references A and B. Analysis results: VIDEO A/B, WORD A/B, WORD A/AES, WORD B/AES INPUT LEVEL This shows the signal level of the reference input. Analysis results: V TASCAM CG-2000...
  • Page 26: Other Functions

    Options: OFF (default), ON 4. Press the MULTI JOG dial to confirm the selection and return to the menu. NOTE Press the EXIT/CANCEL button while making a setting to cancel the change and return to the menu screen. TASCAM CG-2000...
  • Page 27: Setting The Levels Of The Word Clock Outputs

    1. Press the MENU button repeatedly to open the UTILITY menu page, and turn the MULTI JOG dial to select the item. VERSION 3. Press the MULTI JOG dial to execute, or press the EXIT/ CANCEL button to cancel. TASCAM CG-2000...
  • Page 28: Checking The Error Log

    This shows how the unit recovered from the error. 1080i / 1080Psf 29.97 Recovery result 1080P / 720P 59.94 This shows what happened when the unit recovered. *3: This will not be restored to the factory default even if the item is executed. FACTORY PRESET TASCAM CG-2000...
  • Page 29: Specifications

    Long-term frequency stability: ±0.005 ppm (daily) ATOM: 10.0 MHz ±0.5 ppm (annually) GPS: 10.0 MHz, PPS VIDEO OUTPUTS Connector type: Output impedance: 75 Ω Output format SD video black burst: NTSC (RS-170A) PAL (ITU-R624) SD video composite sync: TASCAM CG-2000...
  • Page 30: General

    483 x 45 x 310mm (width × height × depth) Dimensional drawings • Illustrations in this Owner’s Manual might differ in part from the actual product. • Specifications and external appearance could be changed without notification to improve the product. TASCAM CG-2000...
  • Page 31 Ce produit est sujet aux réglementations concernant la garantie légale dans le pays d’achat. En cas de défaut ou de problème, veuillez Your unit must be serviced by an authorized TASCAM service station in Except as specified below, this warranty covers all defects in materials contacter le revendeur chez qui vous avez acheté...
  • Page 32 ✂ WARRANTY Model/Modèle/Modell Owner’s name/Nom du possesseur/Name des Eigentümers Modello/Modelo/型号 Nome del proprietario/Nombre del propietario/顾客姓名 CG-2000 Serial No./No de Série/Seriennummer Address/Adresse/Adresse Numero di serie/Número de serie/序列号 Indirizzo/Dirección/顾客地址 Date of purchase/Date de l’achat/Datum des Kaufs Dealer’s name/Nom du détaillant/Name des Händlers Data dell’acquisto/Fecha de compra/购买日期...

Table of Contents