LG LG9600 User Manual page 78

Connect
2. Tap the Menu Key
the menu.
3. Tap Connect.
4. Tap Bluetooth. The
[BLUETOOTH ADDRESS IS NOT
SET] message appears if the
address is not set.
5. If Bluetooth® is off, you must turn
it on by tapping TURN ON
the upper left side of the screen
6. Tap ADD and then START to
begin searching.
7. The device will appear in the
ADD NEW DEVICE menu when
it is located. Select the device
you want to pair with your
LG9600 by tapping the item on
the list.
8. The handset will ask you for the
passcode of the device you
selected. Or a confirmation
●
message
78
LG9600 | User Guide
appears to ask whether your
to access
device codes match with the other.
Consult the Bluetooth® accessory
instructions for the appropriate
passcode (typically "0000" - 4
zeroes). Enter the passcode, and
then touch OK.
9. Once pairing is successful, touch
to select either Always Ask or
Always Connect to select your
on
preference for how the LG9600
.
connects with this recently
added device.
10. Once pairing is successful,
touch either Always Ask or
Always Connect to select your
preference on how the LG9600
connects with this recently added
device.
11. Once paired, you will see the
device listed in the Bluetooth
Menu.