PSC PT 2000 User Manual page 44

Using the PT 2000 and TopGun with PALPRO
Figure 3-35: The Location ID Code Display
Figure 3-36: The ITEM IDDisplay
Figure 3-37: The Next ITEM ID Display
34
Scan a bar code for the location or use the keypad to enter the ID
6.
code.
With a scanner, the code is entered automatically; with a
keypad, press the
The prompt appears on the first line of the screen, and
7.
ITEM ID
the location ID appears on the third line.
Scan the bar code for the item, or use the keypad to enter the
8.
item's ID number or description (for example,
The location ID and item ID appear on the third line of the
9.
screen, separated by a comma. The
the screen, and the portable is ready to accept another ID for an
item at the current location.
Note: If the application is set up to add a date/time stamp, the
date and time that the item was checked out will follow the
item ID on the third line. (Scroll the display to see the entire
line.)
LOCATION ID
¤
IN :
F3=REV F4=EXIT
key.
<ENTER>
ITEM ID
¤
IN :MAIN
F3=REV F4=EXIT
ITEM ID
¤
IN :MAIN,P203
F3=REV F4=EXIT
P203
).
prompt remains on
ITEM ID
PT 2000® & TopGun®