Jensen VM9313 Installation And Operation Manual page 16

VM9313
<E~s6>
NOTE: The amount of Information displayed when
receiving an HD Radio signal is dependent upon what is
being broadcast. Some stations broadcast their call
letters (name), the artist's name, song title, and category
of music.
PTY Search
After tuning to an HD Radio channel, the Program Type
categories are listed, allowing listeners to find similar
programming by genre.
§
87.5 MHz
P2 90.1
MHz
P3 98.1 MHz
P4 106.1 MHz
P5 107.9 MHz
P6 102.9 MHz
I
Preset:
I
OJ00D
GJ00D
0000
01
Clear
10
2. Touch the on-screen MEM button (17) to open the
preset screen.
3. Enter the preset number for which you would like to
store the current station (or press EXIT to cancel and
close the menu). The preset number and station
appears highlighted on the left side of the screen.
NOTE: Multicast stations can be stored as preset
stations.
Recalling
a
Station
1. Select a band (if needed).
2. Touch an on-screen preset button (6) to select the
corresponding stored station.
Auto Store (AS)
To select 18 strong FM or 6 AM stations and store them in
the current band:
1. Select a band (if needed).
2. Press and hold the PICIBAND button (3) on the control
panel for 2 seconds to activate the Auto Store function.
The new stations replace stations already stored in that band.
02:07 AM
Ttlil
Auto oHD
Non-speciflc
02 News
03 Information
04 Sports
05
Talk
06 Rock
( Info: DAWSON McALLIST
If the PTY menu is not displayed, press the PROG button
(20) on page 2/2 to toggle between HD Radio multicast
channels and PTY categories.
When a PTY category is selected from .the touch screen
menu, the radio will start scanning for stations broadcasting
in the selected category.
Using Preset Stations
You can store up to 18 presets for FM and 6 presets for AM.
Stored stations appear on the left side of the screen.
Storing
a
Station
1. Select a band (if needed), then select a station.
18:
FM
106.7 MHz
T,III
~02:27AM
WXXL-FM
Auto OHD
:
~
HD-1
HD-2
@
HD-3
(
Info: Lil Love
)
(f!:OG$
~212 ~
V
Direct Tuning
To enter a radio station directly, touch the ~ button or
press the GOTO button (21) on the remote control to display
the direct entry menu.
!FM: MHz I
OJ00D
GJ00D
0000
01
Clear
10
Enter the desired radio station using the on-screen number
pad. Press the enter button (arrow) to tune to the selected
station. To exit the screen without changing the station, touch
Exit. To clear your entry and start over, touch Clear.
HD Radio Multicast Channels
To tune to an HD Radio multicast channel, tune to the main
signal and then press the PROG button (20) on page 2/2. If a
Multicast channel is being broadcast for the current station,
the corresponding multicasting number appears on the left
side of the screen. To view the title and artist, if available,
select HD-1, HD-2, HD3, etc.
14