Page 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 4
Avoid water and wet locations. This product can be used in the following countries:...
DECLARATION OF CONFORMITY For the following equipment: Product Description: 1-Port Gigabit GPON Terminal Model No.: TX-6610 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives: Directives 2004 / 108 / EC, Directives 2006 / 95 / EC, Directives 2011/65/EU The above product is in conformity with the following standards or other normative documents:...
One Power Adapter for TX-6610 1-Port Gigabit GPON Terminal Quick Installation Guide One RJ45 cable One Resource CD for TX-6610 1-Port Gigabit GPON Terminal, including this User Guide Note: Make sure that the package contains the above items. If any of the listed items are damaged or...
Thank you for choosing the TX-6610 1-Port Gigabit GPON Terminal. 1.1 Product Overview TP-LINK’s TX-6610 is a next-generation Gigabit Passive Optical Network (GPON) terminal, ideal for Fiber to The Home solution. It’s an incredibly robust device allowing users to access high-speed internet connections via its GPON port and share it with a Gigabit Ethernet port.
TX-6610 1-Port Gigabit GPON Terminal User Guide 1.3 Panel Layout 1.3.1 The Front Panel Figure 1-1 The GPON Terminal’s LEDs are located on the front panel. They indicate the device’s working status. For details, please refer to LED Explanation. LED Explanation:...
TX-6610 1-Port Gigabit GPON Terminal User Guide 1.3.2 The Back Panel Figure 1-2 LAN: Through the port, you can connect the ONT to your PC or the other Ethernet network devices. OPTICAL: The OPTICAL is where you will connect the fiber.
Step 1: Connect the fiber. Plug one end of the fiber into the OPTICAL port on the rear panel of TX-6610, and insert the other end into the wall socket. Step 2: Connect the Ethernet cable. Attach one end of a network cable to your computer’s Ethernet port or a regular hub/switch port, and the other end to the LAN port on the TX-6610.
Chapter 3. Quick Installation Guide 3.1 Configuring PC After you directly connect your PC to the ONT TX-6610 or connect your adapter to a Hub/Switch which has connected to the ONT, you need to configure your PC’s IP address. Follow the steps below to configure it.
Page 15
TX-6610 1-Port Gigabit GPON Terminal User Guide Figure 3-2 Step 3: Select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties button. Figure 3-3 Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK.
Page 16
TX-6610 1-Port Gigabit GPON Terminal User Guide Figure 3-4 Now, you can run the Ping command in the command prompt to verify the network connection. Please click the Start menu on your desktop, select run tab, type cmd or command in the field and press Enter.
192.168.1.2 ~ 192.168.1.254. 3.2 Quick Installation Guide With a Web-based utility, it is easy to configure and manage the TX-6610 1-Port Gigabit GPON Terminal. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
Page 18
TX-6610 1-Port Gigabit GPON Terminal User Guide Note: 1) Do not mix up the user name and password with your ONT account user name and password which are needed for PPP connections. 2) If the above screen does not pop up, it means that your Web-browser has been set to a proxy.
TX-6610 1-Port Gigabit GPON Terminal User Guide Chapter 4. Configuring the ONT This chapter will show each Web page's key function and the configuration way. 4.1 Login After your successful login, you will see the four main menus on the left of the Web-based utility.
TX-6610 1-Port Gigabit GPON Terminal User Guide Figure 4-1 4.2.2 Optical Module Status Choose “Status” “Optical Module Status”, and you will see the ONT’s current optical module information. Figure 4-2 4.2.3 Port Status Choose “Status” “Port Status”, and you will see the ONT’s current port status.
TX-6610 1-Port Gigabit GPON Terminal User Guide Figure 4-3 4.3 Statistics Choose menu “Statistics”, and then you can view the statistics of the ONT as shown in Figure 4-4. Figure 4-4 4.4 Network Choose “Network”, there are two submenus under the main menu. Click any one of them, and you will be able to configure the corresponding function.
TX-6610 1-Port Gigabit GPON Terminal User Guide Figure 4-5 • IP Address: Enter the ONT’s local IP Address, then you can access to the Web-based Utility via the IP Address, the default value is 192.168.1.1. • Subnet Mask: Enter the ONT’s Subnet Mask, the default value is 255.255.255.0.
“User Management”, and then you can change the factory default user name and password of the ONT in the next screen as shown in Figure 4-7. TX-6610 provides two users: admin/admin and user/user. Both can be used to log in the management page.
TX-6610 1-Port Gigabit GPON Terminal User Guide Figure 4-8 4.5.2 Firmware Upgrade Choose menu “Management” “Firmware Upgrade”, and then you can update the latest version of firmware for the ONT on the following screen. Figure 4-9 To upgrade the ONT's firmware, follow the instructions below: Download a most recent firmware upgrade file from our website (www.tp-link.com).
TX-6610 1-Port Gigabit GPON Terminal User Guide There is no need to upgrade the firmware unless the new firmware has a new feature you want to use. However, when experiencing problems caused by the ONT rather than the configuration, you can try to upgrade the firmware.
TX-6610 1-Port Gigabit GPON Terminal User Guide Appendix A: Specifications General 802.3, 802.3u, 802.3ab, 802.1p, 802.1q, ITU-T G.984.1, G.984.2, Standards and Protocols G.984.3, G.984.4 Safety & Emission FCC, CE One 10/100/1000M Auto-Negotiation RJ45 port(Auto MDI/MDIX) Ports One SC/UPC (GPON) port...
Page 28
TX-6610 1-Port Gigabit GPON Terminal User Guide Physical and Environment 0℃ ~ 40℃ Working Temperature Working Humidity 10% ~ 90% RH (non-condensing) -40℃ ~ 70℃ Storage Temperature Storage Humidity 5% ~ 95% RH (non-condensing)
Page 29
TX-6610 1-Port Gigabit GPON Terminal User Guide Appendix B: Troubleshooting T1. How to connect to the Internet? To connect to the Internet, please run the dialing software such as WinPoet or EnterNet to do the virtual dialing as the following described.
Page 30
TX-6610 1-Port Gigabit GPON Terminal User Guide • Click Broadband (PPPoE). • Enter the User name and Password given by your ISP, and type a Connection name to identify your connection, and then click Connect. T2. How can I restore my ONT’s configuration to its factory default settings? Once the ONT is reset, the current settings will be lost and you will need to reconfigure it.
Page 31
TX-6610 1-Port Gigabit GPON Terminal User Guide For Windows 8 • Move your mouse to the lower right corner and you will see the Search icon in the Popups. • Go to Apps, type Control Panel in the search box and press Enter.
TX-6610 1-Port Gigabit GPON Terminal User Guide Appendix C: Technical Support Technical Support For more troubleshooting help, go to: http://www.tp-link.com/en/support/faq To download the latest Firmware, Driver, Utility and User Guide, go to: http://www.tp-link.com/en/support/download For all other technical support, please contact us by using the following details:...