Xblue Networks X16 Quick Start Manual page 2

The X16 system comes standard with 4 RJ11 extension ports. Each extension
port supports up to 4 proprietary digital telephone endpoints, for a total of 16
endpoints. Each port on the system can support a maximum of 600 feet of
cable.
13~16 9~12
It is important to connect an endpoint (telephone) to every cable pair that is
connected to the system.
If the cable has any "Bridge Taps", extensions may ex-
perience distortion. If locating a bridge tap is not practical, a quick resolution is to use
a different cable pair such as the Yellow/Black or White/Orange.
Ports 1~4
301 302 303 304
Ports 9~12
309 310 311 312
-> Phone Setup
Use the Navigation buttons to complete the following programming
Numbering Extensions Feature Key Programming
AUTO MUTE AUTO MUTE -> Phone Setup
12:45P 07/04 FRI
312
-> Phone Setup AUTO MUTE -> Feature Key AUTO MUTE
System Setup
-> Extension No. AUTO MUTE AUTO MUTE Select FTR Key
Auto Mute
Extension No. AUTO MUTE FTR#01:DSS/BLF AUTO MUTE
=301
=309
Extension Name
-> Phone Setup AUTO MUTE -> Phone Setup AUTO MUTE
System Setup
AUTO MUTE AUTO MUTE
-> User Name ->Call Forward
Reset Phone
AUTO MUTE AUTO MUTE
User Name Waiting Time
= =16 Seconds
AUTO MUTE AUTO MUTE
User Name Forward Destination
=Voice Mail
=Courtney
5~8 1~4
Ports 5~8
305 306 307
Ports 13~16
313 314 315
Enter Programming
mode
Voice Mail Setup
-> Phone Setup AUTO MUTE
System Setup
System Setup
AUTO MUTE
-> VoiceMail Setup
User Name
Extension No.
AUTO MUTE
-> Remote Code
Personal OGM
Default Password is 123
AUTO MUTE
Remote Code
=XXX
Forward Calls Personal OGM
-> Personal OGM AUTO MUTE
System Setup Clear My VMSG
Personal OGM AUTO MUTE
VoiceMail Setup Play
Personal OGM AUTO MUTE
Re-Record
Re-Recording OGM AUTO MUTE
Stop
Correct Installation Process
WRONG Installation Process
Plug the system in to power it up. Once powered up, the LED will blink rap-
308
idly, 4 impulses per-second (IPS), after 5 seconds, it will being blinking at the
normal operational rate of 1 IPS. To ensure that the system is initialized prop-
erly, switch the "init" switch back and forth three times. When the LED re-
turns to 1 IPS, the system will be fully operational. For proper operation, be
sure to reset, by unplugging, the system after all extensions are connected.
316
Use the Navigation buttons to complete the following programming
Date & Time (####)
Enter Password AUTO MUTE
=XXXX
-> Date & Time AUTO MUTE
Recall Time
Date & Time AUTO MUTE
=07 07/04 11:45P
Date & Time AUTO MUTE
=07 07/04 11:45P
Music Source
-> Music Source
AUTO MUTE
CO MSGW
Music Source AUTO MUTE
=External
Music Source AUTO MUTE
=Internal
Music Source AUTO MUTE
=External
-> System Setup
Area Code Programming
-> Area Codes AUTO MUTE
Mail System
->Home Area Code AUTO MUTE
Local Area C1
Home Area Code AUTO MUTE
=913
AUTO MUTE
OK! Home Area Code
=913 OK!
10 Dialing Local Area Code
-> Local Area C1
AUTO MUTE
Local Area C2
AUTO MUTE Local Area C1
=816
AUTO MUTE Local Area C1
=816 OK!
AUTO MUTE -> Local Area C1
Local Area C2
OK!
Initialization Switch
Enter Programming
mode
Voice Mail Setup
AUTO MUTE
-> Mail System
Reset KSU
-> AUTO MUTE
AutoAttend Ring
Attendant Ext#
Ring All Extensions
AutoAttend Ring AUTO MUTE
=Off-AllExt Ring
Ring Attendant and Auto Attendant
AUTO MUTE AutoAttend Ring
=On-AA Ring Only
System OGM
Day Time AUTO MUTE
=08:00A
AUTO MUTE
Night Time
=05:00P
AUTO MUTE
Day Time OGM
Re-Record
AUTO MUTE
Night Time OGM
Re-Record