Mitsubishi Electric MFZ-KA25VA Service Manual page 37

OPERATING PROCEDURE
4. Removing the horizontal vane motor unit
(1) Remove the panel. (Refer to 1.)
(2) Remove the screws of the horizontal vane motor unit and
pull out the horizontal vane motor unit. (See Photo 6.)
(3) Disconnect the connector from the horizontal vane motor
unit.
5. Removing the indoor fan motor (upper)
(1) Remove the panel. (Refer to 1.)
(2) Remove the electrical box. (Refer to 3.)
(3) Remove the nozzle (upper). (See Photo 7.)
(4) Unhook the water cover from the catches and remove the
water cover. (See Photo 7.)
(5) Removing the screw of the motor band, and then the
motor band. (See Photo 8.)
(6) Remove the line flow fan and the indoor fan motor (upper)
from the box.
Photo 6
Photo 7
Photo 8
Screw of the motor band
37
PHOTOS
Screw of the horizontal
vane motor unit
Nozzle <Upper>
Water cover