Kenwood LSF-1010 Instruction Manual page 9

2. Attach the arm to the stand.
Pole
Clip
Base
3. Plug the speaker cord into the base of the stand.
Cord
Plug the cord into
the jack.
Push the clip open (see illustration) and
fit onto the pole.
Plug the cord extending from the speaker
into the jack on the base of the stand.
You can adjust the position of the speaker by changing the height and angle
of the arm as desired. See "Adjusting the Satellite Speaker Position" on
page 16.
Move arm up or down
to desired position.
Setting Up the Satellite Speakers
LSF-1010 (EN)
9