1. Introduction 2. Safety Information 3. Dimensions and Specifications 4. Main Function 5. Rear Panel Display and Operation 6. Instructions for Manual Programming 7. Master/Slave Control 8. Cable Connection...
1. Introduction Thank you for purchasing our LED PAR 36 light. Please read these instructions carefully before operating to avoid any possible damage and accidents caused by misuse. The LED PAR 36 light has a hydrodynamic aluminum shell. Three colors of high-brightness LED lights (red, blue, green) are used to create a wide spectrum of colors.
3. Dimensions and Specifications Voltage: 100-264 VAC ~60Hz Power: 18W Size: 118mm deep x 115mm wide x 197mm high Net Weight: 0.8 Kg Lamp Type: (6) pc of ‘3-in-1’ High Power 3W LED’s Lamp Life: ~50,000-100,000 hours Lamp Angle: 25-45 degrees (produces a 5’ dia. spot of light from a 10’ distance, with a 2’...
5. Rear Panel Display and Operation LED Display Selection buttons Menu Up Down Enter DMX OUT DMX IN DMX input/output MENU: Access the menu or return to a previous menu option UP: Menu selection or parameter increments DOWN: Menu selection or parameter increments ENTER: Select the current menu option 6.
Page 7
• Repeat the process for each color Sample colors: Color Name Green Blue White Dim White Orange Yellow Chartreuse Spring Green Cyan Blue Indigo Navy Purple Pink www.eddylight.com 1-800-914-3538...
7. Master/Slave Control The MASTER functions as a master as long as it’s not in DMX mode (and ideally no cable plugged into the DMX INPUT on the unit). It sends a signal to the SLAVE through a DMX cable and synchronizes its settings to it.
Need help?
Do you have a question about the LED PAR 36 and is the answer not in the manual?
Questions and answers