Advertisement
Dear Client,
Thank you for choosing the Elipson products.
Please take the time to read carefully this users manual before installing you speakers.
It contains advices in order to extract the best profit and instructions to use them safely.
We recommend you to keep the packaging and this users manual in case
of eventual ulterior uses.
Advertisement
Table of Contents
Related Manuals for Elipson Audio Bridge
Summary of Contents for Elipson Audio Bridge
- Page 1 Dear Client, Thank you for choosing the Elipson products. Please take the time to read carefully this users manual before installing you speakers. It contains advices in order to extract the best profit and instructions to use them safely. We recommend you to keep the packaging and this users manual in case...
- Page 2 4. Press continuously (6 seconds) on the «well» button on the back of the Audio Bridge. The «well» logo on the front side of the Audio Bridge should now be blinking quickly 5.
- Page 3 (White) (White) 6’’ 6’’...
- Page 4 The Audio Bridge features three separate wired input. All of the input signals connected through these ports will be sent to the Planet LW speakers. Optical Input: connect your digital source with a «toslink» optical cable. The Audio Bridge is compatible only with stereo signals.
- Page 5 The Bluetooth signal will be sent to the Planet LW speakers. When you first connect your Bluetooth source to the Audio Bridge, you will need to complete the pairing. This procedure is done only once for each bluetooth source 1.
- Page 6 4. NOTES • When you are using the Audio Bridge, the USB and iPhone dongles can not be connected to the Planet LW speakers. If you want to use dongles, please turn off the Audio Bridge. • The maximum reach between the Audio Bridge and the Planet LW speakers is 10 meters (unobstructed).
- Page 7 Verify the electrical voltage before connecting it to a power source This electronic device was designed to work in numerous countries. We advise you to hook it up completely before connecting it to the AC power source. Take care when unplugging the power cord When you unplug the power cord from the power source, do so by pulling on the head of the plug rather than on the cable.
Need help?
Do you have a question about the Audio Bridge and is the answer not in the manual?
Questions and answers