Before reading this manual This operation manual contains basic instructions on installing and using the network keyboard. Users who are using this product for the first time, as well as users with experience using comparable products, must read this operation manual carefully before use and pay heed to the warnings and precautions contained herein while using the product.
Before reading this manual Important Safeguards 1. Read Instructions 10. Overloading All the safety and operating instructions should be read before the Do not overload wall outlets and extension cords as this can result in appliance is operated. the risk of fire or electric shock. 2.
This network keyboard controls Network Video Recorders (NVRs), network cameras and Video Management System remotely via network connection. Also, the network keyboard controls PTZ cameras connected via RS485 connection. The network keyboard can be accessed, configured, and managed by the IDIS Discovery (integrated network installation tool) program with the following features: •...
Part 1 – Introduction Typical Applications Controls for PTZ Cameras PTZ Cameras RS485 Network Keyboard You can control PTZ cameras via RS485 connection. For more information, see Part 2 - Installation, PTZ Camera Registration. Controls for NVR Systems Network Cameras Network Cameras Monitor Monitor...
Part 1 – Introduction Controls for Video Management System Network keyboard Client Network Video Analytics Network Streaming Administration, Update Monitoring Network Network Cameras NVRs Recording You can control Video Management System via a network. For more information, see Part 2 - Installation > Video Management System Registration and Part 3 - Operations >...
Part 1 – Introduction Overview Rear Panel 1 2 3 4 5 6 7 Speaker USB Port Network Port RS485 PTZ Port RS485 DVR Port Power In Joystick Port • The network connector is not designed to directly connect a cable or wire for outdoor use. •...
Page 11
For more information about the network setup, The LCD default screen appears after finishing the see Part 5 - Remote Setup and refer to IDIS upgrade. If an error occurs during the software Discovery Operation Manual on the installation CD upgrade, see Part 6 - Appendix >...
RS485 NVR Termination (1) switch is not factory reset function is performed. The function also supported. can be performed remotely using the IDIS Discovery 5 RS485 PTZ Termination (2) program. The network keyboard restarts after finishing Set the switch ON if RS485 communication the function.
Part 1 – Introduction Top Panel Joystick PTZ Camera Control Buttons LCD Screen Device Control Buttons Arrow Buttons Enter Button Command Buttons Jog Dial Shuttle Ring 1 Joystick 5 Arrow Buttons Enables pan and tilt controls for a PTZ camera by Allows you to navigate through setup menus or using a stick and zoom of a PTZ camera with an adjust numeric values during configuration.
Advanced mode. Both the LCD menus and the IDIS Discovery program can be used for registration in Basic mode, and the IDIS Discovery program can be used for registration only in Advanced mode.
Part 6 - Appendix > PTZ Camera Model Numbers. → → Advanced Mode PTZ cameras can be registered using the network keyboard remotely with an aid of the IDIS Discovery program. For more information about remote registration, see Part 5 - Remote Setup > Devices.
The user-defined IDs registered on the network keyboard are required for control. NVRs can be registered on the network keyboard remotely with an aid of the IDIS Discovery program. For more information about remote registration, see Part 5 - Remote Setup > Devices.
Page 17
Part 2 - Installation Configure the information and click OK. Click a monitor or camera in the list and click Edit. Configure the monitor or camera information. • ID: The network keyboard assigns the ID • ID: The network keyboard assigns the ID automatically when the NVR is registered, automatically when the NVR is registered, and you can change the ID.
Setup. You can register the video management system for control via network connection. The video management system can be controlled only in Advanced mode with an aid of the IDIS Discovery program. Connect the video management system to the network.
Part 3 - Operations You can control devices via RS485 and network connection with the network keyboard. The devices must have been registered on the network keyboard. You can control the devices in Basic or Advanced mode depending on the device’s registration mode on the network keyboard. For more information about device registration, see Part 2 - Installation and Part 5 - Remote Setup.
This can be done by using the LCD menu cancels the command and returns to the default or the IDIS Discovery program. This function does not screen. work if a User password has not been set or if the button lock time is set to Never.
Part 3 - Operations Controls for PTZ Camera Controlling a PTZ Camera You can control PTZ cameras via RS485 connection. For more information about control buttons, see Part 6 - Appendix > Buttons. Video Out RS485 Network Press the camera ID. To control the camera in Basic mode, press the 485 ID instead of the Press the camera ID.
Part 3 - Operations SHIFT PANE MACRO SHIFT PANE Press . You can control the NVR for the main PANE SHIFT ESC F3 F4 Press . The video for the camera is displayed PANE SHIFT ESC CAM F3 F4 MACRO monitor 1 using the device control buttons.
Part 3 - Operations SHIFT PANE Select a target site in the Site list, and drag and Press PANE SHIFT ESC F3 F4 drop it on the Live screen by using the mouse SHIFT PANE MACRO button connected to the network keyboard. The live video for the selected site is displayed on the screen.
Basic mode with the menu of the LCD screen. System setup and device registration can also be done SHIFT PANE remotely with an aid of the IDIS Discovery program. For more information about the remote setup and Press PANE SHIFT...
Part 4 - LCD Menu Configuration Setup Menu System Version Displays the software version. Sets the Admin password or User password (max. four digits). Entering the current password allows you to enter a new password; there is no factory default password. The Admin Password password is required to connect to the network keyboard and set up the LCD menu.
Setup Type Advanced when controlling devices via network and RS485 connection. When selecting the Advanced mode, you can only register devices with an aid of the IDIS Discovery program. Selects the device to control via RS485 connection and General configure the RS485 port information for RS485 communication.
Part 5 - Remote Setup System You can change all settings of a network keyboard remotely. Run the IDIS Discovery program, select a network keyboard, and click the Setup icon on the Main screen. Select Remote Setup from the Setup menu. Then the Remote Setup screen appears.
Part 5 - Remote Setup • User Pwd: Click to change the password (max. Button four digits) for control of the network keyboard. After entering the current password, you can enter a new password. Note that there is no default password. •...
Part 5 - Remote Setup Audio IP Address • Type: Select the type for network configuration. Ask Adjust the volume for audio input and output by using your network provider for details about the network the slide bar. connection type and connection information for the Audio may not work properly if the network keyboard network keyboard.
Part 5 - Remote Setup General If the devices use the FEN feature, enter the information on the FEN server for the device to be registered. • Setup type: Select Basic or Advanced when controlling devices via RS485 connection only, or select Advanced when controlling devices via network and RS485 connection.
Page 31
Part 5 - Remote Setup • Scan: Click to find and list the devices connected • Number of CAMs: Set the number of connected to the network (in case of network cameras only). If cameras. the device connects to the network using the mDNS (Multicast DNS) protocol, the device may not be •...
Page 32
Part 5 - Remote Setup • Add: Select a device in the device list and click the button to register the device on the network keyboard. The setup screen appears to allow you to enter the connection information for the device. - ID: The network keyboard assigns the ID automatically when the device is registered, and you can change the ID.
Part 5 - Remote Setup Monitor • ID: The network keyboard assigns the ID automatically when a device is registered, and you can change the ID. The ID is used to distinguish the monitor from others when selecting it with the network keyboard, so each must have a unique ID.
Part 5 - Remote Setup - No.: Displays the sequences of the operations in Macro the macro. The network keyboard takes actions based on the sequence number in the list when performing the macro. A macro is a preset instruction that calls a complete - Button: Double click the field and click the series of commands to perform a particular task.
PTZ camera is directly connected to the network keyboard. • Check the camera settings. The type of the camera must have been set to PTZ Camera. (On the IDIS Discovery program: Setup > Remote Setup > Device > Setup > Type of camera: PTZ Camera)
Part 6 - Appendix Controls for PTZ Camera • Depending on the PTZ camera specification, some functions may not work. For more information about each feature, SHIFT PANE MACRO refer to the operation manual of the PTZ camera. • When a PTZ camera is connected to another device, some functions may not be supported depending on the SHIFT PANE MACRO...
Part 6 - Appendix Type Type C-CC501 (TOA) C-CC501 (TOA) LG Speed Dome PTC-1000 (ELMO) PTC-400 (ELMO) Remote PTZ (IDIS) CCDA (Siemens) Fastrax-IIE (HiTron) HRX-1000 (Honeywell) AUTODOME (BOSCH) GSD series(G4S) N-Control (NOVUS) A730HM (LG) WV-CW970/CS950 (Panasonic) System Upgrade Error Codes When an error occurs during software upgrade, see the following error codes.
Part 6 - Appendix Specifications INPUTS/OUTPUTS Network Connection 10/100 Mbps Ethernet Audio In 1 line in or Microphone Audio Out 1 line out CONNECTORS Audio In/Out Mono/Stereo Ethernet Port RJ-45 RS-485 PTZ Serial Port Terminal block RS-485 NVR Serial Port Terminal block USB Port 2 on rear panel (2.0)
Part 6 - Appendix Map of Screens (Remote Setup) Remote Setup System General Button Audio Network IP Address Device General Setup Function Macro Button Ver. 1.5...
Page 45
IDIS Co., Ltd. For more information, please visit at www.idisglobal.com...