Page 2
Introduction 2D Laser barcode scanner, using Symbol barcode engine, combines the best scanning performance and value. The device provides an accurate, easy, and fast method of data entry and data storage for computerized information systems. It is easy to install and requires “PL-2303 Driver Installer”...
Installation Insert the plug on the free end of the Communications Cable into the appropriate connector on the host as below described: 1. USB Connection (RS232 data format) Connect with host 2. RS232 Connection connect with host Require 5V adapter for power supply...
Page 4
NOTE: for Serial port (RS232 cable), please plug the power connector of 5V power adapter to RS232 cable. Be sure that Host computer is turned OFF Connect scanner cable to the USB port(COM port) on the host system. .Ensure that all connections are secure. Turn on your host. And please operate the scanner under the right software application.
Page 5
Figure 1 Step 1: key-in a file name Step 2: select the first Step 3: press OK Figure 2 No need to key-in Step 1: key-in the identify Step 1: key-in the identify COM number, ex. COM number COM 5 Step 2: press OK Step 2: press OK Figure 3...
Setup from Bar Code Label Functions – 1 RESET CONFIGURATION TO DEFAULTS BUZZER...
Page 7
Functions – 2 CODE ID SYMBOL CODE ID CHARACTER AIM CODE ID CHARACTER NONE SCAN PREFIX SCAN SUFFIX 2 SCAN SUFFIX 1 ENTER (Under office environment if you want to CONTINUOUS change line you have to scan this two barcode)