Advertisement
This Booklet is designed as a guide for installing and
using the 10 Base 5/T Transceiver on 10Base-T
Ethernet applications
The 10 Base 5/T Transceiver provide both an AUI
connector and RJ-45 modular jack to facilitate direct
connect from the Thick Ethernet Host to 10Base-T
Ethernet network. The Host can be a Thick Ethernet card
or a 10Base-5 repeater.
Set SQE Switch
SQE is the Signal Quality Error function that provides
"Heart Beat" self-test signal. This signal verifies that the
collision detect circuit in the transceiver is operational. If the
Host to which the transceiver is connected is a computer, set
the SQE switch to ON. If the Host is a repeater (coaxial
cable use), set the SQE switch to OFF.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
L-COM.COM E-MAIL: SALES@L-COM.COM PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.
Advertisement
