Sony Cyber-shot DSC-W5 Service Manual page 45

1-8. SY-001 BOARD TYPE CHECK (DSC-W7/W17)
The SY-001 board type can be discriminated with the mounted parts.
Note: When the data has changed because of board replacing etc., check the data setting is right. If not, rewrite to the right value.
Checking Method:
1) Refer to "SECTION 2 DISASSEMBLY" to remove the SY-001 board.
2) Referring the following figure, each type is discriminated with the mounted parts on the SY-001 board.
SY-001 BOARD (SIDE B)
• Differences of mounted parts on the SY-001 board
Ref. No. Former Type
R238 XX
R305 XX
R306 0
R309
XX
R349 0
X201 67.5MHz
• Differences of data
Page Address
7D E2
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 7D, address: E2, and set data: 00 (Former type) or data: FF (New type).
[Save]
3) Click on the SEUS screen.
4) Wait for more than 3 sec.
5) Select page: 80, address: 30, and check that the data is "00".
6) Select page: 00, address: 01, and set data: 00.
DSC-W5/W7/W15/W17
1. SERVICE NOTE
X201
New Type
0
0
XX
0
XX
XX
Former Type New Type
00 FF
Mount : Former Type
No Mount: New Type
— 2 —