Advertisement
Names and functions of parts
Main Unit
HOLD indicator
Play indicator
HOLD
Battery
indicator
Track number indicator
4 (Skip down) key
Hand strap
attaching hole
O P E N
Battery cover
Remote Control
HOLD switch
+ (Volume up) key
¢ (Skip up) key
MODE key
LCD
4 (Skip down) key
– (Volume down) key
6 (Play/pause) key
Disc Holder
¢ (Skip up) key
6 (Play/pause) key
LCD
5 (Volume up) key
7 (Stop/off) key
(Volume down) key
Charge key
HOLD switch
OPEN slider
HOLD
OPEN
MODE key
(Only by remote control operation)
Use this key to set playback-related features and other convenient
functions. Please also read "Playback (Application)" and "Convenient
functions" for details.
The mode changes each time the
When the MODE key is held de-
MODE key is pressed.
pressed for more than 2 seconds:
The mode changes each time the
1 Fast forward/fast reverse
MODE key is pressed.
(search)
1 AUTO PLAY
2 Changing the display mode
3 Play Mode
2 AUTO POWER SAVE
3 Operating tone (Beep)
4 Changing the tone
4 Original display
(BASS BOOST)
5 Original display
To change one of the above set-
ups after returning to the original
7 (Stop/off) key
display, restart from the step of
pressing and holding the MODE
Charge key
key for more than 2 seconds.
PHONES jack
Using the Clip
Press and release.
Clip
Clip the remote control unit to the
edge of your bag or pocket.
Power sources
Power Supply
The specially provided rechargeable battery, commercially sold AA al-
kaline battery, the specially provided AC adaptor, the special car bat-
tery adaptor, and other power sources can be used for this unit. Use
the power supply that suits the application of the unit.
Using the AC adaptor
To household outlet
DC
HOL
D
IN
4 -
5.
1V
PHO
NES
OPE
N
To DC IN jack
AC adaptors may differ depend-
ing on the country or sales region.
DC IN jack
(Extemal power jack)
When Using Commercially Sold AA Alkaline Battery (LR6)
ª
·
PHONES jack
For use in a car
Please use the separately sold car battery adaptor (DC-C70) and car cas-
sette adaptor (CAC-2) for listening connected to a car stereo system.
Never connect the unit to the external input terminal (AUX input termi-
nal etc.) of a car stereo system, as this will cause malfunctions.
Charging the rechargeable battery
HOLD Function
Cancel the HOLD function with the HOLD switch and then operate the keys.
When the HOLD function is engaged, the unit will not respond to operation
of the keys. For details, refer to "Avoiding Faulty Operation (HOLD)."
The specially provided rechargeable battery is not fully charged. When using
it for the first time, charge the battery according to the following procedure.
Charge the battery with the power to the unit turned off. (The battery is
not charged while the unit is in operation.)
1
Set the rechargeable battery in place.
1 Open the battery cover.
1
2
1 Slide the battery cover up.
2 Open the battery cover.
2
Charge the battery.
1 Connect the specially provided
AC adaptor.
Main unit
To household outlet
Remote control
D
DC
IN
HOL
4 -
5.
1V
PHO
NES
N
OPE
To DC IN jack
If the battery indicator is not displayed though the battery is correctly set
up for recharging, the battery life may be expired. In this case, replace the
battery with new one.
The time needed to charge the battery fully is about 3 hours.
A fully charged battery can be used for about 9 hours. (Playing time may
differ slightly depending on the environment the unit is used in.)
Playback
Playback
Cancel the HOLD function with the HOLD switch and then operate
the keys. When the HOLD function is engaged, the unit will not re-
spond to operation of the keys. For details, refer to "Avoiding Faulty
Operation (HOLD)."
1
When Using the Recharge-
Connect the remote control
able Battery
and headphone.
ª
·
Insert the battery making sure
the positive (ª) and negative
(·) poles are correctly aligned.
When using the battery for the
Headphones may differ depending on the country or sales region.
first time, charge the battery
Commercially sold headphones with stereo mini plugs ( 3.5mm) can also
before using it.
be used.
2
Inserting a recorded MD.
1 Open the disc holder.
Insert the AA alkaline battery making
sure the positive (ª) and negative
(·) poles are correctly aligned.
DC
IN
4 -
5.
1V
PHO
NES
OPE
N
OPEN
Do not force the disc holder
open,for this will damage it.
3
Start playback.
2 Insert the rehargeable battery
and close the cover.
Main unit
ª
·
Skip Function
Insert the rechargeable battery mak-
ing sure the positive (ª) and nega-
Using the 4 key and ¢ key, you can skip to the start of the track
tive (·) poles are correctly aligned.
you want to listen to.
Skip Up Function
2 Press the 7 key twice in succes-
¢: Track number increases
sion.
Each time the ¢ key is pressed
Charging check
Charging start
during playback, the operation will
skip to and playback the subse-
C
C
quent track.
Pressing and holding the ¢ key
After 15 sec.
changes the displayed track num-
bers continuously. (except during
Check
Charge
Random Playback)
(The indication goes out after charging.)
(Basics)
2 Insert the MD and close the disc
holder by hand.
D
HOL
DC
HOL
D
IN
4 -
5.
1V
PHO
NES
OPE
N
Press the center of the MD until
the disc is locked into place.
When the unit has been set to "AP
on" (Auto Play mode), the unit
automatically turns on and starts
playing the MD by closing the disc
holder. For details, refer to "Set-
ting AUTO PLAY".
Power comes on and playback
starts from the first track.
"NO TITLE" will be displayed
when the MD has no track titles on
it.
After the last track is over, play-
back will stop.
Remote control
Skip Down Function
4: Track number decreases
When the 4 key is pressed while
playback is in progress, operation
will skip to the start of the track
currently being played back, and
playback will resume from there.
Pressing and holding the 4 key
changes the displayed track num-
bers continuously. (except during
Random Playback)
DMC-K3(EN) 2
Advertisement
