Control of a different device with the accessory remote controller
Register the setup codes for your audio and video
The devices which can be set up are VCR SAT (satellite tuner), TV, and CABLE TV).
1 Press one of the devises key for more
than 2 seconds
2 Use the numeric keys to enter the
setup code.
3Press DEVICE (
or numeric keys to test the code.
If the code is acceptable, your devices
work as it is.
Operating other devises
1 Press one of devises key for
operate.
DVD CD
RADIO
BAND
FRONT
TV
DVD CD
RADIO
VCR
SAT
BAND
FRONT
TV
CABLE
1
2
3
4
5
6
7
8
9
0
CLEAR
P.MODE
) key, CH +/- keys
2 Press DEVICE
vise power on.
VCR
SAT
CABLE
The LED on the remote
control unit lights.
Refer to the code table and enter the 4-digit setup code
while the LED on the remote control unit is lit. (p)
÷ The LED goes out when the code is not correct or not
recognized.
÷ When the setup code has been recognized, the LED
flashes 3 times and setup is completed.
3 Press devise operate key.
. key to de-
(Keys which can be used to
operate connected devices
DEVICE
49
DVR-5070 (EN)
E)