6 Blinks Error Code (HD Models)
If the power LED continues to blink even after the TV is unplugged, press and hold the power
switch on the TV for a few seconds until the LED turns off.
Trouble Mode
Defective Board
CAUTION: The TV power should not be turned on while
SC2 is disconnected. This could damage the SS board.
SC Energy Recovery Circuit
SC, SS, A, SU,SD, and Loose connections
Warning: Disconnect AC Power prior to making any
disconnection or connection.
LIST OF MODELS:
TC-P42X1
TC-P42C1
TC-42PX14
TC-P50X1
TC-P50C1
TC-50PX14
Slide #41