Led Indication; Factory Reset - Kinivo BTC455 User Manual

7. LED Indication

Status
Powered off
Powered on
Pairing mode
Standby mode

8. Factory Reset

WARNING: Performing a factory reset on the BTC455 will delete any previous
pairings and will restore the unit to factory default settings. Only perform this if
you are experiencing any issues with the product.
Press and hold the previous and next song buttons simultaneously for 5
to 7 seconds.
The BTC455 will make two audible beeps and the LED will blink twice.
The next time the BTC455 is powered on, it will automatically enter pairing
mode.
Kinivo BTC455 Bluetooth Car Kit with Multipoint
LED Indicator
Off
Blinking blue
Alternating blinking blue and red
Slow blinking blue
11