Connections And Buttons - Devolo dLAN 200 AV Wireless G User Manual

|
12
Initial use
2.2.2

Connections and buttons

The device can be wall-mounted.
For further details on encryption, please refer to the chapter 4 on 'Establishing
a connection to the dLAN network'.
|
devolo dLAN 200 AV Wireless G
The four LAN ports ETH1 through ETH4 allow you to connect PCs or other
network devices to the dLAN 200 AV Wireless G using commercially availa-
ble network cables.
The Reset button can perform a dual function:
If you keep the button pressed for longer than 10 seconds, the config-
uration of the device is reset to the factory default settings, i.e. all the
settings you have already configured will be lost.
If you keep this button pressed for less than 10 seconds, the device will
be restarted.
You can make your dLAN network more secure by simply pressing the
encryption button.
To add individual encryption to your dLAN 200 AV network, press each
encryption button on all connected devices for one second within two
minutes of one another.
To remove a dLAN 200 AV device from your existing network, press the
encryption button of the corresponding device for at least 10 seconds.
|