Summary of Contents for Fulltone Choralflange CF-1
- Page 1 ™ ™ Model CF-1 Owner’s Manual Fulltone Musical Products Inc. 11018 washington Blvd. Culver City, Ca 90232 310-204-0155 fax 204-0156...
- Page 2 Page 1 Congratulations on your Purchase of the Fulltone Analog Stereo Choralflange As a professional musician and studio guitarist, I spent many years not being able to find a Chorus or Flanger that was good enough to stay on my pedalboard for any length of time.
- Page 3 Center Pin being Negative. It is HIGHLY recommended that you use only the Fulltone FPS-1 because it is regulated and the optimum tones in this pedal are achieved with exactly 9.0 volts…fresh batteries are often 9.5+volts and the flanging sounds may be affected.
-
Page 4: Specifications
Fulltone Musical Products Inc. assumes no liability for any injuries or death resulting from the use of this product by itself or in conjunction with other products. - Page 5 Page 4 Choralflange Settings This page contains some suggested settings to achieve some very popular Chorus, Flange and Leslie-Like sounds. Notice that the faceplate markings on your Choralflange have 12 lines that correspond to the face of a clock. This Clock reference is a good way for you to remember your favorite settings, and feel free to tweak your own sounds and note them on the Blank faceplates included later on in this section.
- Page 6 Page 5 Heavy Flanging: is best achieved with a slow to medium (CCW) Rate settings, with High (full CW) Depth and Mix settings. It may be necessary to reduce (CCW) the Volume Adj. settings unless a significant level increase is desired. Tip: place a good overdrive/distortion pedal before the Choralflange to experience amazingly thick Flange sounds!
- Page 7 Page6 User Settings Template Print this out to save some of your favorite sounds. © 2002 FMP Inc. All Rights Reserved...