Car Dash Cameras C1H User Manual

Full hd dvr

Table of Contents

Download this manual

C1H Full HD DVR Instructions before use

Thank you for purchasing Car Dash Cameras C1H Full HD DVR.

Before use, please read this manual carefully to ensure the correct use of the product. Keep

this manual for future reference.

Operating Conditions

Don't expose your C1H to high temperatures or direct sunlight. Do not put dash protectors

behind the camera as the heat reflected could cause product failure, this will void your

warranty. Do not use in dusty or Damp environments.

The equipment's normal working temperature is + 0 ° - + 60 °, the humidity range is 10% -

80%.

Please place the equipment in a safe place if these numbers are exceeded.

To clean your C1H, simply use a clean soft moist cloth.

Please do not modify or repair the equipment as it will void your 12 months Australian

warranty, it may also lead to equipment damage.

low illumination high-definition video

The built-in low illumination lens optimises Night Videos

C1H USER MANUAL

（

1 080P@30fps

、

7 20P/30FPS

）

Table of Contents

Do you have a question about the C1H and is the answer not in the manual?

Page 1 Operating Conditions Don't expose your C1H to high temperatures or direct sunlight. Do not put dash protectors behind the camera as the heat reflected could cause product failure, this will void your warranty. Do not use in dusty or Damp environments.
Page 2 3.2.4 inch LCD Screen 4. The GSensor recognises impact sensitivity and automatically locks the video 5. Ignition on, camera starts 6. supports cycle Video or Loop Recording 7. HDMI output port 8. Supports up to 32 GB TF card 9. Camera battery charges while recording 10.
Page 3 Left view 9. POWER 10. TF SD Card slot Right view 11. USB 12.HDMI 13.Reset Top view 14. HOLDER...
Page 4 Setup Instructions start Up Before you insert the Memory card, personalise the menu. To set the menu you can use the built-in battery, you can connect the car-charger cable and turn on ignition or you can start the camera by connecting to your computer using the USB cable.
Page 5 Second Menu - Setup Menu (Two presses of M button) 1. Date/Time: Set the date and time. 2. Plate Number on Movie: You can set your number plate, it will be stamped on the video. 3. Auto Power Off: Sets the camera to turn off after power is off. 4.