“REMOTE CONTROL POWER BUTTON IS DISABLED” **No need to power down the CipherTV Bar – power saving mode is auto activated after 4 hours of TV or by pressing the ‘home’ button on the remote to bring you back to...
Contents Page no. Attention To ensure proper use, maintain warranty eligibility Attention--------------------------------------------- and avoid unnecessary damage, please pay What’s in the Box---------------------------------- attention to the following: Front View------------------------------------------- Avoid putting the STB on hot surfaces and in high humidity or dusty environments. Back View------------------------------------------- Avoid putting the STB close to any materials with Mounting Stand Installation---------------------...
Front View Installation Mounting Stand Installation 1. Infrared Receiver 2. Camera 3. Power Status (very dim, on at all times) 4. Microphone Mount 5. TF/SD Card Slot (side) 1.The buckle position of the Mount Stand corresponds to the Back View groove at the bottom of the STB 3.
Connection Diagram Installation Steps 1. Ensure TV and STB powers are OFF before installation. 2. Connect the HDMI cable, see Figure OR Connect with AV cable, see Figure 3. Link the Air Mouse to the STB, see Figure Link the Air Mouse remote control to the STB by plugging in the Air Mouse USB receiver (that’s pre-inserted in the battery compartment hatch of the air mouse, see Figure...
Air Mouse Remote Control Definition Function Power Power button is disabled Decrease volume Volume - Increase volume Volume + Move cursor up / TV channel up Down Move cursor down / TV channel down Left Move left / TV EPG left Right Move right / TV EPG right Confirm / hold for Icon properties...
Technical Specification Add / Remove Applications Install new Apps Dual Core CPU 1.6GHz There are two ways to install apps into the CipherTV Bar. 1 GB DDRIII Memory Download through Google Play Store and Install 8GB Flash Memory Look for the Google Play Store icon on the apps home Android 4.1.1, online upgrade...
Reboot App time the STB is powered up. To disable the auto Use the reboot app to reboot the CipherTV Bar. Press “ ” boot-up feature, repeat the above steps and select button on the remote control, move the cursor to the Reboot None or Disable on the Auto Boot-up section.
How to Register: Do I need to turn off the CipherTV Bar after use? 1. Locate the 12-digit MAC address found at the base of The CipherTV Bar uses very little power and uses your CipherTV Bar.
Page 11
How to watch videos from TF/SD Card and USB? 1. Insert the TF/SD Card on the right side slot of the CipherTV Bar, or connect the USB device to the USB slot. 2. You can now access and manage files/videos on the TF/SD Card or USB using the ES File Explorer application.
Wi-Fi Hotspot Setup Guide 1. Connect Ethernet cable to the LAN port at the back of the CipherTV Bar and the other end to your Internet modem or router. 2. Turn on your TV and power up CipherTV Bar. Wi-Fi Hotspot 3.
Wi-Fi Connection Setup Guide 1. Turn on your TV and power up CipherTV Bar. Wi-Fi Connection 2. Make sure your wireless router is on. 3. Click on the Settings and turn on the Wi-Fi. 4. Select Wi-Fi connection name on the right side menu.
CipherTV or one of its authorized retailers (any such box, the "Digital Bar"; any such retailer, a "Retailer"). The Digital Bar purchased by Customer may be new or refurbished. This warranty is subject to updates and governed by the latest terms and conditions as posted on the CipherTV website at www.ciphertv.com.
Page 15
Arbitration. To the extent permitted by applicable law, any arbitration will be performed by CipherTV management acting commercially reasonable and in good faith in a jurisdiction local to and approved by CipherTV. As applies to this limited warranty, the arbitration process to a fuller extent, or any modification hereof, will be available on the CipherTV website (www.ciphertv.com).
Need help?
Do you have a question about the S35218NA and is the answer not in the manual?
Questions and answers