Download Print this page

Lava Kazan User Manual

Usb 2.0 ide hard drive enclosure

Advertisement

Quick Links

USB 2.0
IDE Hard Drive
Enclosure
Kazan
by:
U S B 2 . 0
D R I V E
LA V A

Advertisement

loading

Summary of Contents for Lava Kazan

  • Page 1 USB 2.0 IDE Hard Drive Enclosure Kazan Kazan U S B 2 . 0 D R I V E LA V A...
  • Page 2: Getting Started

    Getting Started 1. Set the hard disk you are installing in the Kazan as master drive according to the manufacturer's instructions. New hard disks are typically already configured as master drives.
  • Page 3: Installation

    Firmly attach the power and ribbon cable connectors on the interface board to the hard disk drive. Turn the hard disk drive/interface board assembly right side up and place it into the bottom half of the Kazan enclosure. (The bottom half is the portion with the front bezel attached.) Rear plate...
  • Page 4 Attach the hard disk drive LED cable connector to the interface board pins. Interface Board NOTE: Top View LED connector fastens to posts with green wire on the "+" terminal, as marked on the interface board. Attach cable here Power switch Push LED connector...
  • Page 5 Secure the hard drive bracket with a screw on each side. Fit the top half of the enclosure to the bottom half by sliding it forwards and then down. Fit the rear plate into the slotted tracks in the top half of the enclosure.
  • Page 6 Secure the enclosure to the rear plate with four screws. Connect the Kazan to a USB port with the included USB cable. port Attach the power supply cable to the connector on the rear plate, and Turn the Kazan drive on with the connect the power supply to a power switch.The drive activity...
  • Page 7: Release Notes

    (Code 28)" error message when attempting to access a drive in a Kazan. First ensure that the power, data, and IDE cables are all correctly and snugly attached. Check the power supply's LED indicator is green to verify it is operating.
  • Page 8: Technical Support

    (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Lava Computer MFG Inc. 908 Niagara Falls Blvd. #629. North Tonawanda NY 14120-2060 Rev. B00...