You have purchased a quality SMK product, proudly made in the USA. If you use and maintain your SMK product for what it is intended, you will enjoy many years of safe, reliable service. The SMK “P100” portable sprayer utilizes the popular SHURflo®...
The publication of these safety precautions is done for your information. SMK does not by the publication of these precautions, imply or in any way represent that these...
Safety Precautions Trouble shooting W A R N I N G SPRAYER WILL NOT START Before attempting to operate the unit, read and If battery is properly seated and fully charged understand all safety precautions and warnings. If On/Off switch is in the off position ...
Page 5
C A U T I O N Chemical Compatibility Refer to the following website for a chemical compatibility chart to ensure that the material you wish to spray is Due to the nature of this unit, it is imperative the unit compatible with the pump components (EPDM, is properly cleaned and flushed using the Santoprene®...
SMK Industries service center as instructed by Pump may cycle on and off at varying intervals depending calling 515-953-9967. Proof of purchase date and an on viscosity and temperature of the material being sprayed.
1. Slide the 3 inch diameter by ½ inch thick Foam Gasket over SMK shall in no event be liable for death, injuries to the plastic inlet tube onto the metal fitting. persons or property or for incidental, contingent, special or consequential damages of any kind by the reason of use or sale of any defective product or part.
ration Assembly Before Operating your Sprayer To prepare the unit for operation, assemble the sprayer as W A R N I N G follows: 13. Attach the Sprayer Hose assembly to the Garden Hose Thread Carefully read through this entire manual before attempting Fitting located on the side of the Sprayer housing.
Need help?
Do you have a question about the P100 and is the answer not in the manual?
Questions and answers