Menu Systems - Kenwood KMD-D401 Instruction Manual

Operations
Menu System
To accommodate a greater number of functions, a function set
system has been employed for making settings. Press the
DISP button to enter the function set mode and then display
the function to make the setting.
1
Selecting MD play source mode.
2
Press the DISP button for at least one second, enter the
function set mode.
3
Press either the 4 or ¢ button on the centre unit.
Each time the button is pressed, the adjustment mode will
change as follows:
∞
"MENU TITLE" (Selectable title)*
∞5
"MENU SCROLL" (Title scroll)*
∞5
"MENU ANA LV" (Spectrum analyzer level)*
∞5
"MENU LCD CNT" (LCD contrast level)*
∞5
"MENU COLOR" (Selectable Illumination)
5
4
Press the DISC+ or DISC- button on the centre unit.
Look at the table to adjust the mode being displayed.
5
Press the DISP button to end the function set mode.
1
2
3
4
Table of Adjustment Mode
Adjustment
mode
DISC+ button
(Display)
Selectable
Analyzer title ("ANA")
title* 1
("TITLE")
Title scroll* 2
Automatic scrolling ("AUTO")
("SCROLL")
Spectrum
The spectrum
Analyzer
analyzer level
level* 3
increased.
("ANA LV")
LCD contrast
The setting values
level* 4
higher.
("LCD CNT")
Selectable
Illumination
("COLOR")
NOTE
*1: The spectrum analyzer name is not shown while the disc title or
track title are being displayed.
*2: • Even when the system is set to "OFF", the title will
appear once on the scroll display if the track or the disc is
switched.
• The analyzer name is shown at all times on the scroll
display.
*3: The volume changes according to the volume setting on the centre
unit, so set the centre unit to a normal volume level before
adjusting it.
*4: The contrast on the spectrum analyzer display is not adjustable.
— 8 —
Operation of Control button
DISC- button
Disc title("DISC")
Track title ("TRACK")
Off ("OFF")
The spectrum analyzer
level decreased.
The setting values
lower.
Green("GREEN") Red("RED")