Chevrolet 2015 City Express Owner's Manual page 42

There are two kinds of POI data
supported by the system:
User POIs user-defined
points of interest (POIs) that can
later be set as a destination and
found using route guidance.
POI-Warnings user-supplied
areas such as hazard spots that
the system displays in a pop-up
window when the vehicle is
approaching the
designated area.
To create your own User POIs:
1. Connect a USB mass storage
device to your personal
computer.
2. Use a standard software
program to create a list of POIs.
Make sure the software can
support the CSV file format.
3. In the first column, enter the
longitude value of the position of
the POI.
4. In the second column, enter the
latitude value of the position of
the POI.
5. In the third column, enter the
name of the POI. Information
entered in the fourth column,
such as address or phone
number, will be appended to the
name of the POI.
6. Add more rows if necessary.
7. Save the file with the extension
.csv. For example:
myplacesfile.csv.
The name of the .CSV file will be
used to create a My Points of
Interest category in the system.
Create separate .CSV files with
different names to create other
My Points of Interest categories.
8. Make sure to select the USB
mass storage device as the
location to save, using the exact
folder name /myPOIs for the
User POIs or /myPOIs/
myPOIwarnings.
For POI-warnings, if the USB
mass storage device s root
folder is represented by f:/, save
Infotainment System
the file to the folder f:/my POIs
for User POIs or the folder f:/
myPOIs/myPOIwarnings.
9. For POI-warnings, connect the
USB mass storage device to the
vehicle s USB port.
Adding User-Defined Points of
Interest (POIs)
To add your User POIs to the
system:
1. Press the NAV button on the
faceplate.
2. Press Next Page.
3. Press My Points of Interest.
41