Advertisement
Connecting The Subwoofer
A) Line Level Connection (known as "Low-Level"):
Connect the audio/video receiver or processor's subwoofer output, to the Sinclair Audio Subwoofer's L/R Line Level input.
Subwoofer Line-Level/Low-Level Input
B) Speaker Level Connection (known as "High-Level"):
Connect the audio/video receiver's Left/Right main channel outputs to the Sinclair Audio L/R Speaker Level Inputs. Make
sure to connect "+" (Red) to "+" ( Red), and "-" ( Black) to "-" (Black). (Optionally, you may connect your Left/Right speak-
ers as shown below).
High-Level connection Tip:
When using small satellite speakers, connecting the Sinclair Audio subwoofer with the Speaker Level inputs and then connect-
ing L/R satellites to the "Speaker out" will automatically limit the low frequency sent to the small speakers with the high-
pass filter built into the Sinclair Audio subwoofer. This is helpful to small speakers, in that they will then not be required to
reproduce frequencies that may be beyond their operating range.
You may now plug your subwoofer's power cord to the A/C wall outlet.
You are now ready to use your new Sinclair Audio subwoofer.
Advertisement
