Notice: Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limitations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
A 1-year warranty against workmanship from the data of purchase is valid only if the monitor housing is unopened. If a problem is encountered under normal use, please contact Defender Security Customer Service at 1-800-543-4330. Warranty cannot be guaranteed if damage to the monitor is determined to be the result of misuse.
Part 1 Introduction............5 Check the Contents of the Package.......... 5 Understand Each Part ..............5 Description of the Function Buttons ........7 Control Operation................... 7 OSD Menu ..................... 7 OSD Function Menu ................7 Part 2 Assembly of Accessories ......... 8 Assembly Description ..............
Part 1 Introduction This section describes the preparation before start up and the operation of the function buttons. • “Understand the contents of the package.” • “Understand each part.” • “Understand the operation of the functions.” Package Contents □ 8.0” TFT LCD Monitor x1 □...
Page 6
Overview of the Rear Side of the Monitor Description Audio 1, input terminal for the right channel (AUDIO 1 R IN) Audio 1, input terminal for the left channel (AUDIO 1 L IN) Audio 2, input terminal for the right channel (AUDIO 2 R IN) Audio 2, input terminal for the left channel (AUDIO 2 L IN) Audio output terminal for the right channel (AUDIO R OUT) Audio output terminal for the left channel (AUDIO L OUT)
Description of the Function Buttons Control Operation POWER ─ Power on/off switch SOURCE ─ Signal source switch MENU ─ On-screen display of menu/confirm operation UP ─ Move up/Increase (Turn the volume up ) DOWN ─ Move down/decrease(Turn the volume down) OSD Menu 1.
Part 2 Assembly of Accessories This section describes how to assemble two monitors together. Assembly Description Connecting the Monitors Rack mount bracket Screws for the rack mount bracket Rack mount bracket Rack mount bracket 1 Place the saw-shaped side of the rack mount bracket towards the BNC side for the monitor connection and then fasten the six screws for the rack mount brackets.
Disassembly of the Support Stand 1 After removing the screws from the support stand, the support stand can be removed. Screws for the support stand Support stand Appendix Product Dimensions Audio IN-I Video - I Audio IN-II Video - II Audio OUT S-Video IN DC 12V IN...