Table of Contents
Advertisement
your WiFi connection.
Note: For i-Frame SIGN and HOME2-XL the RJ-45 slot can be used as well,
default settings is DHCP automatic configuration) For reliable operation of
LAN Ethernet connection, it is recommended to disable WiFi access
temporarily.
Date/Time
Settings of current Date/Time, highly recommended settings is Automatic
(requires internet connection). Don't forget to set your GMT zone.
Note: If you need to adjust a display resolution or orientation, use this
option as well and follow Display settings.
I-Frame has default 720p output resolution for SIGN and 1080p for HOME2.
If your TV/monitor allows using of higher resolution, please set it
accordingly (full HD=1080p, HD-ready=720p). Then it is recommended to
check the display position and size and eventually to make an adjustment
(each output resolution requires separate display adjustment). For certain
special conditions, there are 50Hz modes available ( if do not why to use
50Hz, then use 60Hz settings)
Here is possible to make a screen rotation (Screen mode) for HOME2 and
newer edition of SIGN
Internet update
i-Frame checks the latest firmware version on Internet.
Changelog
The text file with all firmware revisions history appears.
Note – as this file is downloaded from
server, internet connection is
required.
Status
General information about current i-
Frame device.
OPTIONS - Display options
D
e
l
a
y
D
e
l
a
y
Time between the consecutive photos during Slideshow ( Range 1sec –
100hrs )
i-Frame User Manual
10
Advertisement
Table of Contents
