Advertisement
Quick Links
Advertisement
Related Manuals for LevelOne PRT-1000
Summary of Contents for LevelOne PRT-1000
- Page 1 LevelOne DSA-1000 / PRT-1000 Device Server / Thermal Printer User Manual V1.0...
- Page 2 Internet. The hotspot on-demand ticket billing kits containing PRT-1000 Line Thermal Printer and DSA-1000 Network Device Server provides instant ticketing for users and comes with two COM ports for redundancy where two Line Thermal Printers can...
- Page 3 The hotspot on-demand billing kit is designed with ease of use for account generation via DSA-1000 Network Device Server from the built-in On-Demand billing plan from WHG-1000 WiFi-N Hotspot Access Controller and then prints the account ticket via PRT-1000 Line Thermal Printer.
- Page 4 DSA-1000 Network Device Server For PRT-1000 Thermal Printer Quick Installation Guide DSA-1000 Overview...
- Page 5 Enter, the PRT-1000 will print Statement of “Current Balance”; select in number and click Enter, the PRT-1000 will print Statement of “Early Balance”. CANCEL: Stop to print Statement, Clear input key for unlocking or cancel other event...
- Page 6 DSA-1000 Network Device Server For PRT-1000 Thermal Printer Quick Installation Guide How to reset the Network Serial Server back to factory default setting 1) First unplug the Ethernet Cable connected to the network serial server and press the reset button 2)Then press and Hold the “PRE”...
- Page 7 Connect one end of the RS-232 cable to COM1 port of DSA-1000 on the front panel. Connect the other end of RS-232 cable to PRT-1000's DB25 Connector for communicating with Thermal Printer. 3. Connect the DC power adapter to the DSA-1000 power socket on the rear panel.
- Page 8 “http://192.168.2.253/setting.htm” in the address field. 3. After a successful login, the “Setting Page” will appear on the screen. 4. Set COM1 Settings for communicating with PRT-1000 Thermal Printer.(The default COM1 Setting already matched with PRT-1000) 5. Configure IP Address in the same range of WHG-1000.(The default WHG-1000's LAN IP address is 192.168.2.254)
-
Page 9: Configuration Steps
WHG-1000 provides wireless and wired network service with On-Demand authentication for clients in Service Domain. Administrator can select Billing Plan on each PRT-1000 Thermal Printer. If Billing Plan is enabled, the Thermal Printer can generate On-Demand's tickets. The clients are required to get authenticated successfully before access the Internet. - Page 10 DSA-1000 Network Device Server For PRT-1000 Thermal Printer Quick Installation Guide Step 2 : Set Virtual AP and Select On-Demand's Authentication for Service Domain Click Service Domain, the Service Domain Setup page will appear. Set VAP0 in Domain1 and select On-Demand in Authentication Type. Below depicts an example for Domain1 with AP0 and On-Demand's authentication.
- Page 11 Press FUNCTION button, the Status LED should be FLASH. Select in number 1 and press Enter button, the PRT-1000 Thermal Printer should be print “Thermal Printer Link Test !” message Press CANCEL button to stop function event, the Status LED should be ON.
- Page 12 URL, and then the Domain1 User Login Page will appear. Enter the Passcode of a printer ticket previously generated via PRT-1000 Thermal Printer . Then Click Login button. Below depicts an example for login with Passcode.
Need help?
Do you have a question about the PRT-1000 and is the answer not in the manual?
Questions and answers