Panasonic Viera TC-L32DT30 Owner's Manual page 25

Change the view 3D⇔2D
■
Simply switches 3D ⇔ 2D images (Auto mode)
3D format select
3D
2D
●
Switches to Manual mode (see below)
■
Change 3D format (Manual mode)
During above operation press red button and switch to manual mode.
Display "3D format select (Manual)
3D format select (Manual)
Native
Frame sequential (3D)
Frame sequential (2D)
Side by side (3D)
Side by side (2D)
Top and bottom (3D)
Top and bottom (2D)
2D - > 3D
3D settings (Adjust 3D images)
Select "3D settings" in "Setup"
• How to Use Menu Functions (p. 48)
• Using "Setup" menu (p. 53)
Select the item and set
3D settings
Auto detect 3D Auto 1
On
3D signal notification
Medium
2D -> 3D depth
3D adjustment
Normal
Left / Right swap
Off
Diagonal line filter
Safety precautions
Settings Item Description
Auto 1: Switches to 3D display when 3D indication is available (HDMI 1.4a, AVCHD file,etc)
Auto 2: Same as Auto 1. plus detects 3D signal by identifying similar image in side by side or top-
Auto detect 3D
Note: choose 3D made manually, when auto detection in not available. (Off/Auto 1/Auto 2)
3D signal notification On: Displays a message according to the signal received by the "Auto detect 3D". (On/Off)
Adjusts 3D depth. Available only when "2D->3D" is selected in "3D format select".
2D->3D depth
(Minimum/Medium/Maximum)
3D adjustment See above. (3D adjustment (On/Off), Effect (-3 to +3))
Change this to On when the phases are reversed. (when there is an unusual sense of depth).
Left / Right swap
(Normal/Swapped)
Diagonal line filter On: Resolves discomfort caused by receiving a quincunx matrix signal. (On/Off)
Safety precautions Displays message for viewing 3D images.
* The perceived three dimensional effects of the 3D Eyewear differ from person-to-person.
* If a signal received from an external device is different from the 3D setting of the TV, such as 2D signal when the TV is set to
3D mode, the images may not be displayed correctly.
(example)
■
3D adjustment
Changes 3D depth by adjusting left-right parallax.
3D adjustment (On/Off)
select
Effect (-3 to +3)
next
and-bottom 3D formats.
●
VIERA TOOLS -->p. 20
select
"3D" icon also available.
OK
Press 3D to cycle through the 3D format
3D format select (Manual)
Native
Frame sequential (3D)
Frame sequential (2D)
Side by side (3D)
Side by side (2D)
2D -> 3D
Set "On" and adjusts "Effect"
3D adjustment
3D adjustment
On
Effect
+1
(example)
select
adjust
25