Editing A Movie's First And Last Scenes - Canon EOS 70DN Basic Instruction Manual

X Editing a Movie's First and Last Scenes
Playback with the Touch Screen
X Editing a Movie's First and Last Scenes
You can edit out the first and last scenes of a movie in approx. 1-sec.
increments.
310
Tap [7] at the center of the screen.
The movie will start playing.
To display the movie playback panel,
tap <s1> on the upper left of the
screen.
To pause the movie while it is playing,
tap the screen. The movie playback
panel will also appear.
1
On the movie playback screen,
select [X].
The movie editing panel will be
displayed at the bottom of the screen.
2 Specify the part to be edited out.
Select either [U] (Cut beginning) or
[V] (Cut end), then press <0>.
Press the <U> key to see the
previous or next frames. Holding it
down will fast forward the frames.
Turn the <5> dial for frame-by-
frame playback.
After deciding which part to edit out,
press <0>. The portion highlighted
in gray on the top of the screen is
what will remain.