JDS Uniphase P5000i User Manual page 13

FiberChekPRO Software
CHAPTER 3
FiberChekPRO™
FiberChekPRO Performs the Following Automated Procedures
1. Acquires the fiber image.
2. Analyzes the image.
3. Finds defects and their location to fiber core.
4. Measures and evaluates the defects within each specified Zone.
5. Determines whether defects within the Zones are acceptable according to the
pre-configured failure criteria for each Zone.
6. Displays the results as PASS or FAIL.
7. Saves or prints all relative results in designated directory or printer, respectively.
13
P5000i Digital Analysis Microscope