Advertisement
Quick Links
1K HE3 1000LT STORAGE TANK
Installation and
User Manual
TOP VENT FITTING MUST NOT EXCEED
300mm ABOVE TANK
Warning: Please read and understand the information in this manual before installing or
operating the 1K HE3 1000LT Storage Tank unit.
Max Working Pressure 600 kPa Heat Exchange Coils
WaterMark – AS74500
Caution: DO NOT OBSTRUCT VENT.
Install water heater to requirements of AS/NZS3500.4
Shut off water supply to prevent scalding and burning
CAUTION
When working with this equipment:
Advertisement
Summary of Contents for Ultimate Solar 1K HE3
- Page 1 TOP VENT FITTING MUST NOT EXCEED 300mm ABOVE TANK Warning: Please read and understand the information in this manual before installing or operating the 1K HE3 1000LT Storage Tank unit. Max Working Pressure 600 kPa Heat Exchange Coils WaterMark – AS74500 Caution: DO NOT OBSTRUCT VENT.
-
Page 2: Table Of Contents
1. NOTICE 2. TRANSPORTING THE SOLAR HOT WATER SYSTEM 3. GENERAL 4. IMPORTANT 5. INSTALLATION WARRANTY CONDITIONS TYPICAL INSTALLATION DIAGRAM... -
Page 3: Notice
1. Notice 1.1. The information in this manual is subject to change without notification. Additional pages may be inserted in future editions. 1.2. The series number can be found on packaging, user manual and the storage tank. If there is no series number or the series number is damaged, this product may not be genuine and will not be covered under warranty. -
Page 4: Transporting The Solar Hot Water System
It is advisable to place padding under the evacuated tube cartons during transit. Keep all cartons dry. The Ultimate Solar evacuated tubes are not covered by warranty against failure as a result of damage incurred during transport or installation. The tank will be supplied strapped to a pallet base and shrink wrapped. -
Page 5: General
For this reason it is recommended installing an inline filter before the tempering valve. 3.4 gas Boosting The Ultimate Solar - Solar Water Heater is compatible with gas boosting including, but not limited to, the following products; Rinnai Solar Gas Booster... -
Page 6: Important
4.4 Water Quality The working design of the Ultimate Solar Hot Water System helps protect the inner surface of the stainless steel cylinder because there is not a continuous supply of water borne dissolved solids being brought into the cylinder every time a hot water tap is turned on. - Page 7 When loading boxes, please take care. Ensure that all boxes are strapped down in order to prevent movement. Ultimate Solar does not warrant the tank or heat pipes against failure as a result of damage incurred due to Transport or installation.
-
Page 8: Installation
5. Installation The 1K HE3 1000lt Low Pressure Storage Tank is designed as a thermal store. Heat inout can be by solid fuel boiler, soler or gas boost. The tank MUST BE OPEN VENTED. And it must be subjected to a head pressure of NO MORE THAN 300MM . - Page 9 Scale 1:5 Copple TP2 Copple TP2 Copple TP2 Name Note...
-
Page 10: Warranty Conditions
Please contact Ultimate Solar for more details. This warranty applies only to those components provided as part of the Ultimate Solar Water System and not any third party electrical or plumbing parts, or hot water boosting systems. - Page 11 2. Breakage or any damage to the Ultimate Solar Water Heater System due to impact from any object. 3. If the solar collector is left dry (ie. no liquid circulation) and exposed to regular daily sunlight (ie. not covered for a period exceeding 14 consecutive days).
Need help?
Do you have a question about the 1K HE3 and is the answer not in the manual?
Questions and answers