Uniden VP300 Owner's Manual page 121

(Figure 20)
Step 2: After saving change, enter [Note Information] page, "Note Information" will be seen, then
the changing will come into effect.
Step 3: On the main page, select [Save Change] item, enter [Save Changes] page, and execute the
saving command by click [Save]. [Note Information] page will be seen which means saving
successfully. And the system will be restarted, please wait for a while
Step4: On [TFTP Server]‐‐ [Syslog server] page, new messages are received (See Figure 21)
(Figure 21)

System Log Type: All
Step 1: On the main page, select [SystemAdvanced Settings], enter [Advanced Setting] page,
after setting System Log, (e.g.: System Log Server: 192.168.1.6， System Log Type: All), click [Submit]
(See Figure 22)
94/114