Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
REV 14g
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2008 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 65115
Advertisement
Table of Contents
Related Manuals for HAUL MASTER 65115
Summary of Contents for HAUL MASTER 65115
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. ITEM 65115 Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com...
-
Page 2: Specifications
Maintain product labels and nameplates. attachment device fits on Hook completely These carry important safety information. and safety clasp closes properly. Do not pull load if clasp does not fully close. For technical questions, please call 1-888-866-5797. Item 65115 Page 2... -
Page 3: Assembly And Mounting Instructions
Crank vehicle that is able to withstand the weight of Handle (10) Winch and the 1,200 lb. max. load capacity for 65115 Winch and the 2,000 lb. max. load capacity for 98923 Winch. Figure 3 Mounting Holes Fig. 1 Remove Winch and drill three 5/16”... -
Page 4: Operation Instructions
WARNING! Make sure load is secure and stable before pulling. WARNING! The Pinion must be locked into place before pulling. Otherwise, kickback could occur which can lead to potential property damaged and/or serious personal injury. For technical questions, please call 1-888-866-5797. Item 65115 Page 4... -
Page 5: Maintenance And Servicing
AFTER USE, clean external surfaces of the appliance with clean, moist cloth. WARNING! If the Belt Strap of Winch is damaged, it must be replaced immediately before further use. For technical questions, please call 1-888-866-5797. Item 65115 Page 5... -
Page 6: Please Read The Following Carefully
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. 65115 HAND WINCH PARTS LIST & ASSEMBLY DIAGRAM Part Description Qty. - Page 7 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-888-866-5797. Item 65115 Page 7...
-
Page 8: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.