Step 4 Connect Power; Step 5, Slide Product Into Cutout; Step 6 Install Badge; Step 7 Set Temperature Controls - Monogram ZDWC240NBS Installation Instructions Manual

STEP 3 LEVEL
• Use a 1" open-end wrench to turn the leveling legs
and raise or lower the product.
• Adjust carefully, the wine chiller or beverage center
should be level and plumb with cabinetry, and
should align with adjacent toekick height.

STEP 4 CONNECT POWER

• Connect power cord plug to a properly grounded
receptacle.
• Check to make sure power is on by opening the door
to see if interior light turns on.
Installation Instructions
Turn Right to Lower
Turn Left to Raise
STEP 5 SLIDE PRODUCT INTO
THE CUTOUT
• Carefully, slide the wine chiller or beverage center
into the opening. Be careful not to entangle power
cord.
• Make certain that the door protrudes 1" beyond the
surrounding cabinets.

STEP 6 INSTALL BADGE

• Follow instructions on the back page for installation
of the Monogram badge.
STEP 7 SET TEMPERATURE
CONTROLS
• The temperature controls are preset. Refer to the
Owner's Manual for more information. Allow 24
hours for temperature to stabilize.
6