Page 2
Care fully re ad t hrough t his e nt ire operator’s manual before using your new t iller. Take special care to heed the cautions and warnings.
Page 9
Engine is shipped from factory without oil. You must add engine oil before starting engine.
Page 11
Do not adjust tilling depth unless tine clutch control lever is released to the neutral position.
Page 12
Fill tank to no more than 12.5mm (1/ 2”) below the bottom of the filler neck to provide space for expansion. Do not move choke control to CHOKE t o st op engine. Backfire or engine damage may occur.
Page 13
Never use a “pressure washer” to clean your tiller. W ater can penetrate tight areas of the tiller and its transmission case and cause damage to spindles, pulleys, bearings, or the engine. The use of pressure washers will result in shortened life and reduce serviceability.
Page 14
Remove the spark plug and drain all of t he oil from t he cylinder before at t e m p t ing t o st art t he unit aft e r storage. D o no t use st ro ng d e t e rg e nt s o r p e t r o le um b a se d cle a ne r s w he n cleaning plastic parts.
Page 17
Please contact us at Support@powrkraft.com or go online to www.PowRkraft.com. Thank you for allowing us to serve you. Betst Products Family 83371 Melton RD Creswell OR 97426 Contact Information: Telephone: Local 541-895-3083 Toll Free: 1-877-876-7895 Fax Number: 541-895-2756 Efax Number:...
Need help?
Do you have a question about the PK32640 and is the answer not in the manual?
Questions and answers