Advertisement
Troubleshooting Guide
NO AUDIO
Verify
that the unit is plugged in and all audio connections have
been correctly connected as described in the above installation
sections.
Verify that the Bornia Sound Enhancer is powered up by checking
to see if the blue background lighting is on and the volume is turned
up.
If a sound card is used, verify that the sound card volume is turned
up.
.
If using powered speakers, be sure they are switched on
Audio Distortion
If a computer sound card is used as an audio source, be sure that
the volume control is not
set to it's maximum (100% of its output).
Verify that all items such as audio cables are connected properly
and match the installation instructions.
Make sure that any device that is connected to the Bornia Sound
Enhancer has the volume level at a lower level. High volume
setting will cause distortion.
Note:
Because Bornia processes the audio signal for
enhancement, the original information recorded on the audio
source is a determining factor in the sound quality. Different audio
sources may provide various different results than others.
Warranty
We warrant this product to be free from defects (Material/Assembly)
for one (1) year from the date of purchase. If within one year this
product fails we will repair/exchange (if applicable) this product
free of charge, excluding shipping/handling cost.
-10-
Advertisement
