Ivation Automatic Pill Dispenser Easy Set-Up Manual

The Automatic Pill Dispenser has 3 different
alarm tones and also silence to accommodate
different hearing levels. Symbols A, B and A+B
on the display indicate the selected alarm tone,
if "silence" is selected, then neither A nor B
appears on the display. To change the alarm
tone, first hold down button 3 and then, at the
same time press and hold down button 1 to
choose the next alarm tone. Continue to hold
button 3 and press button 1 to listen to and
select the different tones.
The Automatic Pill Dispenser has a built-in
funtion totest the device. To enter the test mode,
press button 1 for about 12 seconds, the CH
should appear on the display. To exit test mode,
press button 3.
If the Automatic Pill Dispenser does not rotate properly the motor will stop
after a few seconds and display the error message "CH6". Exit the test
mode by pressing button 3.
How to Lock and Unlock the
Automatic Pill Dispenser
To stop the alarm and dispense the pills, pick up the
Automatic Pill Dispenser and tilt over, dumping the
pills into the hand or a suitable container.
Distributed by MADE IN CHINA
C&A Marketing, Inc.
IVATION is a trademark of
2 Bergen Turnpike
C&A IP Holdings, LLC
Ridgefield Park, NJ 07660
©2013 All Rights Reserved
info@myivation.com
1-866-849-3049
Go Back to GMS
AUTOMATIC
PILL DISPENSER
Do not place Automatic Pill Dispenser
in direct sunlight or strong ultraviolet
light as it may cause malfunction
in operation.