Table of Contents
Advertisement
Household IP Cameras Instruction manual
3. Product Use
3.1. Camera installation and connection
Pre-installation considerations:
1. Unpack the box carefully check to confirm the items list consistent.
2. Please read this chapter carefully before installing.
3. Installation, be sure to turn off the power of all related equipment.
4, Check the power supply voltage to prevent voltage unworthy cause device damage.
5. Installation environment: Do not use excessive moisture or high temperature environment,
maintain good ventilation, pay attention to the anti-rain; avoid installing rattling
environment.
6. If the equipment is not working properly, please contact the dealer to buy equipment, do
not disassemble or modify the equipment in any way. Problems caused by unauthorized
modification or repair your own risk.
Connect the camera:
Connect to power adapter, the power indicator light (green) at this time, the device start and self-
test, the PTZ begin to twirl.
Must use the supplied power adapter or 5V/2A power adapter.
Access your network with a network cable to the camera, directly connected to the PC through a
switch or network normal network indicator (yellow) will begin to flash, the physical connection
of the camera.
7 / 21
Advertisement
Table of Contents
