Kenwood KDC-MP242U Instruction Manual page 17

For operating KCA-BT200 (Optional)
For operation refer to Model-A-1 in the Instruction
Manual of KCA-BT200, and the table below. The
[AUTO]/[TI] button should be replaced with [SRC]
button for <Answering the Waiting Call after
Terminating the Current Call>.
Notation used in the KCA-BT200
Instruction Manual
[38] button
Control knob
[AUTO]/[TI] button
Control knob towards up or down
Control knob towards left or right
For operating KCA-BT100 (Optional)
To control KCA-BT100, operate as follows;
To make setting for <Selecting the Dialing Mode>,
select <Menu system> (page 6). Pressing the
[AUD] knob for at least 1 second after selecting
the "D.MODE" item allows you to enter the dialing
method selection mode. To exit from dialing method
selection mode, press Search button.
To make <Disconnecting a Call>, <Clearing the
Disconnection Massage>, and <Rejecting an
Incoming call>, press [DISP] button for at least 1
second.
Moreover, some displays are different from the
description of KCA-BT100 Instruction Manual.
Displays of KCA-BT100 Instruction
Manual
"DISCONCT"
"CONNECT"
"PHN-DEL"
"P-STATUS"
"BT-CON Y"
"BT-CON N"
Operation
[AUD] knob
[AUD] knob
[DISP] button
[FM+] or [AM–] button
[4] or [¢] button
Actual displays on this unit
"HF D-CON"
"HF CON"
"DVC-DEL"
"D-STATUS"
"HF-CON Y"
"HF-CON N"
Menu Glossary
• ICON
Sets the Graphics mode of the display during
normal playback condition.
ON1: Turns on.
ON2: Displays an animation.
OFF: Turns off.
• SWPRE (Switching Preout)
Switches the preout between rear output ("R") and
subwoofer output ("SW").
• SPRM (Supreme)
Technology to extrapolate and supplement with
proprietary algorithm, the high-frequency range
that is cut off when encoding at low bit rate (less
than 128Kbps, Sampling frequency is 44.1kHz).
Supplementing is optimized by compression
format (MP3 or WMA) and processed according to
bit rate.
The effect is negligible with music that is encoded
at high bit rate, variable bit rate or has minimal high
frequency range.
• AUTO1, AUTO2, MANUAL (Tuning mode select)
Select a tuning mode of the radio.
Tuning mode Display
Auto seek "AUTO1"
Preset station seek "AUTO2"
Manual "MANUAL" Normal manual tuning control.
• AUX
When this is set to ON, AUX source can be selected.
ON1: Outputs the sound of external unit connected
to the AUX terminal when switched to AUX
source.
ON2: Activates the attenuator function when
switched to AUX source.
Turn off the attenuator function when
listening to output from external unit. This
prevents the noise when no external unit is
connected to AUX terminal.
OFF: Disables the selection of AUX source.
Set to OFF when not using the AUX terminal.
Operation
Automatic search for a station.
Search in order of the stations in the
Preset memory.
|
English
17